LiftMaster 15-50B60VKK #50 Sprocket — 60 Teeth, 1-3/4-Inch Bore, 3/8-Inch Keyway
The LiftMaster 15-50B60VKK identifies a #50 roller-chain sprocket with 60 teeth and a 1-3/4-inch bore. The manufacturer product-line description specifies a 3/8-inch keyway and two 3/8-16 set screws. The screw-thread designation and keyway are separate measurements, so match the complete chain, shaft and retention arrangement before ordering this commercial drive component. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Chain match | Use the documented #50 chain arrangement. |
| Shaft fit | Confirm the 1-3/4-inch bore and 3/8-inch keyway. |
| Drive ratio | 60 teeth must suit the approved door/operator setup. |
| Other bore variants | Similar 50B60 references can have different shaft dimensions. |
Identify the Assembly and Plan the Repair
A sprocket must suit both the shaft and the approved chain-drive ratio. Do not choose a 60-tooth component simply because a larger sprocket seems likely to increase lifting capacity. The actual operator, door geometry and service documentation determine the correct ratio and loading arrangement.
Inspect the shaft, keying, chain and mating sprocket together. A worn chain or damaged shaft can continue to harm a new sprocket even when its nominal dimensions are correct. Verify hub position and available clearance from the applicable drawing, keeping the 3/8-inch keyway separate from the 3/8-16 screw-thread description.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | 15-50B60VKK |
| Chain series | #50 |
| Tooth count | 60 |
| Bore | 1-3/4 inches |
| Keyway | 3/8 inch |
| Set-screw specification | Two 3/8-16 set screws identified |
Before Ordering
- Confirm #50 chain and 60 teeth.
- Measure the shaft and match the 1-3/4-inch bore.
- Verify the keyway, hub clearance and retention.
- Inspect adjoining chain-drive components for wear and alignment.
Package Contents and Separate Requirements
This offer identifies the sprocket service component with the specified set-screw arrangement. Confirm current supplied screws before installation. A shaft key, chain, master link, shaft, mating sprocket and complete drive assembly are not established as included; obtain any separate items required by the approved configuration.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving commercial door and exposed #50 sprocket — 60 teeth, 1-3/4-inch bore, 3/8-inch keyway can cause serious injury or death. Have a trained door-systems technician perform installation and service.
- Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
- Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
- Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Does 3/8-16 describe the keyway?
No. It is the set-screw thread. The manufacturer product-line description separately identifies a 3/8-inch keyway.
Will a matching bore prove fit?
No. Chain series, tooth count, keyway, hub position and approved drive ratio must also match.
Is a shaft key included?
Do not assume so. Confirm the current package and obtain the specified key and other separate retention pieces.
Can it change operator capacity?
No capacity upgrade is established. Restore the exact approved drive configuration rather than changing tooth count by guesswork.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.