LiftMaster 15-50B12LGH Drive Sprocket — 12 Teeth, #50 Chain, 1-Inch Bore
The LiftMaster 15-50B12LGH is a 12-tooth drive sprocket for #50 roller chain, with a 1-inch bore and a 1/4-inch keyway. It is a replacement mechanical drive component for an assembly that specifies this exact sprocket configuration. Match the complete part number, shaft size and original drive arrangement before ordering. Tooth count and bore size both matter: a sprocket that accepts the same chain can still have the wrong shaft fit or alter the original drive ratio.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Documented H / JHDC drive arrangements | Match this exact reference in the model-specific parts list. |
| #50 roller chain | Correct chain family; shaft fit and alignment must also match. |
| 1-inch shaft / 1/4-inch keyway | Required source dimensions; inspect the complete hub and retention arrangement. |
| Other tooth counts | Not an approved ratio conversion simply because chain size matches. |
Match Shaft Fit and Drive Geometry
The 12-tooth configuration is a defining selection detail. Replacing it with a larger sprocket can change the drive geometry and transmission relationship even when both accept #50 chain. Match the installed shaft, keyway, hub position and complete manufacturer reference. Operator horsepower or door size alone does not determine the correct replacement sprocket.
The sprocket must sit in the correct chain line and be secured using the documented key and retention arrangement. Have the technician inspect the shaft and keyway as well as the teeth. Worn chain or a damaged shaft can cause recurring problems after a new sprocket is installed. Photograph the existing assembly before parts are removed and inspect the mating sprocket during the same repair.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | 15-50B12LGH |
| Designation | 50B12 |
| Tooth count | 12 |
| Chain family | #50 roller chain |
| Bore | 1 inch |
| Keyway | 1/4 inch |
Before Ordering
- Record the complete operator model and the sprocket part number from its service diagram.
- Confirm 12 teeth, #50 chain, a 1-inch shaft fit and the specified keyway.
- Check hub clearance, chain alignment and the required shaft-retention arrangement.
- Inspect the chain, connecting link, mating sprockets and shaft for related wear.
Package Contents and Separate Requirements
This offer identifies the 15-50B12LGH sprocket. Chain, connecting link, shaft, key and a complete installation-hardware kit are not promised as included. Confirm the current carton for retention pieces and obtain additional parts by their own service references. A parts diagram may show the sprocket next to a motor or shaft without including those components in this order.
Safety Warnings — Read Before Installation or Service
- WARNING: An exposed chain drive can trap fingers or clothing and cause serious injury. Replacement requires a qualified door- or gate-systems technician.
- Isolate and secure all applicable power sources and prevent unexpected movement before working on the chain drive.
- Do not change tooth count, enlarge the bore or improvise the shaft connection to make an unmatched part fit.
- Restore guards, verify chain alignment and complete the equipment’s prescribed operating and safety tests before returning it to service.
Related Products and Important Differences
- #50 roller chain, 10-foot length — matching chain family; verify required length and complete drive specifications.
- #50 master link — separate connection component for the specified chain; follow its installation requirements.
Frequently Asked Questions
How many teeth does it have?
The source designation is 50B12: 12 teeth for #50 chain.
What shaft dimensions are specified?
A 1-inch bore and 1/4-inch keyway; confirm the remaining hub and retention details.
Can I substitute a different tooth count?
Only with manufacturer approval for the complete drive arrangement.
Is chain included?
No length of chain or connecting link is promised with this sprocket offer.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.