LiftMaster 142A0271 Trim Plate Kit — KPR2000

LiftMaster 142A0271 Trim Plate Kit — KPR2000

$40.14
Skip to product information
LiftMaster 142A0271 Trim Plate Kit — KPR2000

LiftMaster 142A0271 Trim Plate Kit — KPR2000

142A0271
$40.14
Shipping calculated at checkout.

The LiftMaster 142A0271 is the optional trim-plate kit identified in the KPR2000 wired keypad and proximity-reader installation instructions. It provides a finishing plate around the reader’s mounting location and is a separate accessory from the keypad, pedestal and electrical connections. The manufacturer drawing identifies a nominal 4-by-4-inch plate. Check the existing surface, mounting pattern and reader placement before ordering: a trim plate can finish a suitable opening, but it is not a structural repair for a loose post, damaged wall or unsuitable mounting box.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
KPR2000 wired keypad/proximity reader Manufacturer installation drawing identifies this optional trim plate.
Existing mounting surface Confirm opening coverage and the prescribed fastening arrangement.
Pedestal installation Verify reader and pedestal geometry together.
KPW wireless keypads Different equipment; no interchangeable trim fit established.
CAPXM / CAPXS intercom trim Separate service and accessory references.

Check the Surface Behind the Reader

Measure the area that needs finishing and compare it with the plate drawing before ordering. Look for loose mounting points, an oversized opening or a surface that prevents the reader from sitting flat. The plate should complement a sound mounting arrangement; tightening it over damaged material can leave the reader insecure. Determine whether separate repair of the box, wall or pedestal is needed.

Plan how the reader and its wiring will be supported while the trim is installed. Protect the cable from sharp edges and avoid pinching conductors behind the plate. Follow the KPR2000 installation instructions for the actual surface and cable route. A neat exterior finish does not verify the electrical connection, credential configuration or weather protection of the surrounding installation; those checks remain separate.

Specifications and Product Identification

Specification Details
Part number 142A0271
Product Trim plate / trim ring kit
Documented reader KPR2000
Drawing dimensions 4 × 4 inches
Function Mounting-area finish
Electrical capability None; mechanical accessory

Before Ordering

  • Confirm the reader is KPR2000 and identify its mounting arrangement.
  • Compare the opening with the 4-by-4-inch drawing.
  • Inspect the backing surface, box or pedestal for damage.
  • Confirm supplied hardware and how the wiring will be protected.

Package Contents and Separate Requirements

This listing identifies the 142A0271 trim-plate kit. Confirm the current carton for the plate and any supplied fastening pieces. A KPR2000 reader, pedestal, back box, power supply, credentials and field wiring are not promised as included. The manufacturer illustration shows the trim in relation to the reader to explain placement; it does not turn the accessory into a complete keypad installation package.

Safety Warnings — Read Before Installation or Service

  • WARNING: Reader wiring may remain energized behind the mounting plate. Authorized installers should isolate applicable power before moving the reader or disturbing connections.
  • Support the reader and protect cables from sharp edges, trapped wires and dropped hardware. Do not drill into concealed utilities.
  • Do not use a decorative plate to conceal loose structural mounting or damaged electrical connections. Maintain required safe access during service.
  • After fitting, verify secure attachment and normal authorized-entry operation. A trim plate does not add gate entrapment protection or alter access permissions.

Related Products and Important Differences

  • KPW250 wireless keypad — a separate entry-control option for compatible receivers; it does not replace an intercom component.
  • LOOPDETLM loop detector — a separate vehicle-detection component for approved input arrangements; not pedestrian entrapment protection.

Frequently Asked Questions

Is the KPR2000 reader included?

No. This is the optional trim accessory.

What size is shown?

The manufacturer drawing identifies a 4-by-4-inch plate.

Will it repair a damaged pedestal?

No. The support and fastening points need separate repair.

Can it fit any LiftMaster keypad?

No universal fit is established. This reference is identified for KPR2000.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products