LiftMaster 07-8007 Barrier-Gate Arm Hub — Documented BG770 / BG790

LiftMaster 07-8007 Barrier-Gate Arm Hub — Documented BG770 / BG790

$109.80
Skip to product information
LiftMaster 07-8007 Barrier-Gate Arm Hub — Documented BG770 / BG790

LiftMaster 07-8007 Barrier-Gate Arm Hub — Documented BG770 / BG790

07-8007
$109.80
Shipping calculated at checkout.

The LiftMaster 07-8007 is the gate-arm hub identified in documented BG770/ BG790 barrier-gate parts information. It belongs to the specified mechanical arm connection and must match the installed shaft, arm and clamp arrangement. It is separate from the complete arm, arm clamp, drive crank and shaft. A hub-only replacement should be selected after inspection of the mating components rather than assumed to repair every loose-arm complaint. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
BG770 / BG790 drawing Match the actual arm and shaft arrangement.
Other barrier families No universal interchangeability established.
Arm clamp Separate component in the documented arrangement.
Complete shaft or crank assembly Different service scope; not included by the hub identity.

Identify the Assembly and Plan the Repair

Inspect the hub engagement, shaft and arm attachment after movement or impact damage. If the mating surfaces or retention points are worn, a new hub alone may not restore a secure connection. Identify all affected pieces and support the barrier arm as directed before loosening hardware.

Barrier mechanisms can retain balancing or spring loads. Follow the exact manufacturer service procedure for securing the arm and drive, then restore the approved engagement and retention. Do not infer bore dimensions or use improvised shims to fit the hub to a different shaft. Verify the complete arm movement and protection arrangement after service.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference 07-8007
Component Gate-arm hub
Documented models BG770 / BG790 arrangements
Selection basis Exact shaft/arm connection and drawing
Quantity Verify current order inventory separately from installed requirement

Before Ordering

  • Identify the full barrier model.
  • Match 07-8007 at the correct connection.
  • Inspect shaft, arm and clamp condition.
  • Confirm retention hardware and current supplied quantity.

Package Contents and Separate Requirements

This offer identifies the arm hub. Arm, shaft, clamp, crank linkage, counterbalance components and complete operator are separate unless expressly included. Confirm the current carton and any keys or fastening pieces. The quantity shown in an operator parts drawing describes the installed equipment and does not automatically define the quantity shipped in one order.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving gate and exposed barrier-gate arm hub — documented bg770 / bg790 can cause serious injury. Installation and service require a qualified gate-systems technician.
  • Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
  • Secure the barrier arm and stored balancing loads using the exact manufacturer procedure before loosening the hub. Keep people clear of the arm’s travel.
  • Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.

Related Products and Important Differences

  • LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
  • LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.

Frequently Asked Questions

Is this a complete arm assembly?

No. It is the hub service reference.

Does it include the arm clamp?

No combined clamp package is promised.

Can it fit any similarly sized shaft?

Do not assume so; match the exact service geometry.

Will it repair worn shaft engagement?

No. Mating damage needs separate assessment.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products