LiftMaster 07-8003 Barrier Operator Lower Crank
The LiftMaster 07-8003 identifies the lower-crank service component in the documented BG770 and BG3000-X3 barrier-operator arrangements. Supplier listings may use the K07-8003 ordering form. Match the actual lower-crank callout and installed linkage before ordering, because upper cranks and lower cranks for other barrier configurations can have different service references despite a similar appearance. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Documented BG770 linkage | Match the lower-crank callout and revision. |
| BG3000-X3 | Verify the precise drawing and current service reference. |
| BG790 lower crank | Separate 07-8064 reference appears in the researched drawing. |
| Upper crank or complete linkage | Different components and package scope. |
Identify the Assembly and Plan the Repair
Identify the crank’s position in the linkage before choosing the part. Inspect shaft attachment, adjoining links and the supporting mechanism for wear or distortion. An impact that damages a crank may also affect other linkage components. Replacing only the visible part does not establish that the barrier’s geometry and balance have been restored.
The barrier arm and balancing mechanism can impose mechanical loads even with power disconnected. Have qualified personnel secure the arm and follow the exact service procedure before disturbing the crank. Confirm the current retention and hardware requirements rather than borrowing a torque or key specification from a similar model. After repair, verify the complete movement and required protection functions.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | 07-8003 |
| Component | Lower crank |
| Source SKU | 07-8003 |
| Supplier ordering form | K07-8003; confirm current match |
| Documented context | BG770 / BG3000-X3 service drawings |
Before Ordering
- Record the complete barrier operator and linkage revision.
- Identify lower crank separately from the upper assembly.
- Compare 07-8003 / K07-8003 with the service drawing.
- Inspect adjoining links and confirm safe arm support.
Package Contents and Separate Requirements
This offer identifies the lower-crank service component. A complete crank linkage, shaft, connecting rod, balancing spring, barrier arm and operator are not established as included. Confirm the current crank and attachment pieces supplied before arranging any separate hardware or related repair parts.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed barrier operator lower crank can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is it the upper crank?
No. This reference identifies the lower crank in the documented arrangement.
Will it fit BG790 automatically?
No. The researched drawing uses a separate BG790 lower-crank reference; match the exact model.
Are all linkage pieces included?
No complete linkage package is established. Confirm the current crank-only service scope.
Is electrical isolation the only preparation?
No. Secure the barrier arm and stored mechanical loads as directed before linkage service.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.