LiftMaster 041D7440 Half-Horsepower AC Motor with Travel Module — Selected Chain/Belt Openers

LiftMaster 041D7440 Half-Horsepower AC Motor with Travel Module — Selected Chain/Belt Openers

$367.53
Skip to product information
LiftMaster 041D7440 Half-Horsepower AC Motor with Travel Module — Selected Chain/Belt Openers

LiftMaster 041D7440 Half-Horsepower AC Motor with Travel Module — Selected Chain/Belt Openers

041D7440
$367.53
Shipping calculated at checkout.

The LiftMaster 041D7440 is the manufacturer-listed 1/2HP motor-with-travel-module replacement kit for selected AC chain-drive and belt-drive garage-door openers. It is a model-specific service assembly despite some parts lists calling it a universal motor. Confirm the exact opener reference, drive arrangement and current kit contents before ordering. It is separate from a complete opener, gear/sprocket repair kit and the main logic board. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Manufacturer-listed 1/2HP AC openers Confirm the exact model and repair reference.
DC motor openers No automatic substitution.
3/4HP motor kits Different service selection; do not substitute by mounting appearance.
Separate travel-module listings Some diagrams list feedback components independently; confirm the delivered kit inventory.

Identify the Assembly and Plan the Repair

Diagnose motor, capacitor, wiring and mechanical drive conditions before replacing the assembly. A failed capacitor, damaged gear set or binding door can prevent movement without establishing motor failure. Correct abnormal door resistance and balance through qualified service rather than using the replacement motor to overcome the load.

Use the current motor-kit instructions for mounting, wiring and travel-module setup. The manufacturer’s kit description and the exact supplied inventory govern the order; neighboring separately listed parts are not automatically included. After service, perform the prescribed travel/force setup and reversal tests instead of assuming stored settings remain appropriate.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference 041D7440
Motor class 1/2HP AC
Manufacturer kit description Motor with travel module
Documented examples 8164W, 8165W, 8155W and listed later variants
Application Selected AC chain and belt openers; verify exact model

Before Ordering

  • Confirm the exact supported opener and AC motor class.
  • Match 041D7440 and current kit inventory.
  • Diagnose capacitor, drive and door condition.
  • Plan complete travel setup and safety testing.

Package Contents and Separate Requirements

The manufacturer describes a motor-with-travel-module kit. Confirm current mounting pieces and connections. Capacitor, gear/sprocket assembly, belt or chain, main board, rail and complete opener are separate unless expressly bundled. A universal-motor label in a parts list is not a promise that the kit fits every brand or opener generation.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Do not increase force or substitute a different motor class to overcome a binding door. Follow the exact travel-module setup and reversal-test procedure after replacement.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

Does universal mean every opener?

No. Use the manufacturer’s exact compatibility and repair reference.

Is it a DC motor kit?

The listed application is 1/2HP AC equipment.

Is the main board included?

No main logic board is promised.

Are setup and reversal tests required?

Follow the exact replacement-kit and opener commissioning procedure.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products