LiftMaster 041D3452-2 Limit-Switch Kit — Selected Post-1995 Three-Quarter-HP Chain Openers

LiftMaster 041D3452-2 Limit-Switch Kit — Selected Post-1995 Three-Quarter-HP Chain Openers

$40.67
Skip to product information
LiftMaster 041D3452-2 Limit-Switch Kit — Selected Post-1995 Three-Quarter-HP Chain Openers

LiftMaster 041D3452-2 Limit-Switch Kit — Selected Post-1995 Three-Quarter-HP Chain Openers

041D3452-2
$40.67
Shipping calculated at checkout.

The LiftMaster 041D3452-2 is the limit-switch replacement kit identified for selected 3/4HP LiftMaster and Chamberlain chain-drive garage-door openers manufactured after 1995. The manufacturer lists a limit switch, bracket and adjustment screws in the kit. Match the exact opener and service drawing before ordering; this mechanical limit arrangement is separate from newer electronic travel modules and from the main receiver logic board. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Approved post-1995 chain-drive models Match the exact owner’s manual and service reference.
Other horsepower classes No universal fit established from the shared chain drive.
Electronic travel modules Different feedback technology and service arrangement.
Receiver logic board Separate component and diagnostic function.

Identify the Assembly and Plan the Repair

Identify the installed limit mechanism and inspect the driven parts, switch actuation and wiring. An opener that stops incorrectly may have a mechanical engagement, adjustment or control fault rather than a defective switch alone. Record the original service reference and actual opener configuration.

Use the exact manufacturer procedure to install the kit and set travel. Do not transfer adjustment directions from a different mechanism or use force settings to compensate for a bad travel endpoint. Verify open and closed positions and the prescribed safety reversal response after repair, with the door and track in suitable mechanical condition.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference 041D3452-2
Application Selected3/4HP chain-drive openers after 1995
Listed inventory Limit switch, bracket and adjustment screws
Alias 41D3452-2
Role Specified travel-limit service component

Before Ordering

  • Confirm 041D3452-2 and the exact opener.
  • Verify post-1995,3/4HP chain-drive application.
  • Inspect switch actuation and the limit-drive mechanism.
  • Plan complete travel adjustment and reversal testing.

Package Contents and Separate Requirements

The manufacturer identifies the switch, bracket and adjustment screws. Motor, logic board, complete gear set, rail and opener are separate unless expressly included. Confirm the current kit inventory before dismantling the mechanism. A diagram showing the switch alongside other travel parts does not bundle the entire opener drive with this order.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Do not use force adjustment to conceal an incorrect travel endpoint. Complete the exact limit-setting and safety-reversal procedure after switch service.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

What is included?

The manufacturer lists a limit switch, bracket and adjustment screws.

Is it an electronic travel module?

No. It is the documented limit-switch kit.

Does after 1995 mean every opener built afterward?

No. The specified horsepower, drive and exact service reference must match.

Can it fix a binding door?

No. Door condition requires separate correction.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products