LiftMaster 041-0489-000 Push-Button Door Control — Security+ 3.0 White Learn Button

LiftMaster 041-0489-000 Push-Button Door Control — Security+ 3.0 White Learn Button

$57.30
Skip to product information
LiftMaster 041-0489-000 Push-Button Door Control — Security+ 3.0 White Learn Button

LiftMaster 041-0489-000 Push-Button Door Control — Security+ 3.0 White Learn Button

041-0489-000
$57.30
Shipping calculated at checkout.

The LiftMaster 041-0489-000 service offer is the push-button door control identified by manufacturer instructions for Security+ 3.0 garage-door openers with a white learn button. The instructions specify connection only to the approved 12V low-voltage control wiring. It is separate from a universal dry-contact button, a radio remote and a multi-function wall console. Confirm the exact opener and control reference before ordering or replacing an older two-wire button. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Security+ 3.0 white-button openers Verify the exact opener and control instructions.
Security+ 2.0 yellow-button units Different generation; no automatic interchangeability.
Older ordinary wall buttons Wire count does not establish protocol compatibility.
Mains-voltage circuits Not permitted by the low-voltage control instructions.

Identify the Assembly and Plan the Repair

Identify the opener generation and inspect the existing low-voltage wiring before replacing the control. A wiring fault or opener electronics problem can produce the same nonresponse symptom as a failed button. Do not infer compatibility from the word doorbell or from a similar two-wire case.

The manufacturer requires installation within sight of the door, away from moving parts and at least 5ft above the floor so children cannot reach it. Follow the exact mounting and connection procedure. A control command does not replace reversing sensors or safe supervision, and this push-button does not independently add a Wi-Fi conversion or every feature of another wall console.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference 041-0489-000
Technology Security+ 3.0
Learn-button identifier White
Wiring Approved12V low-voltage control wiring only
Manufacturer instruction 114-6085-000; also covers 003-0853-000

Before Ordering

  • Confirm Security+ 3.0 and the white learn button.
  • Match 041-0489-000 to the exact opener.
  • Verify approved 12V control wiring.
  • Plan the required visible, child-resistant mounting position.

Package Contents and Separate Requirements

This offer identifies the push-button control. Opener, field wiring, radio remote, smart console and safety sensors are separate unless expressly included. Confirm the current mounting pieces and instructions. The shared manufacturer sheet for another control number does not establish that two controls or a complete access system are supplied.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Connect ONLY to the approved 12V low-voltage wiring. Install within sight, away from moving parts and at least 5ft above the floor as directed by the manufacturer.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

Does it fit yellow-button Security+ 2.0?

No automatic fit is established; this instruction is for Security+ 3.0.

Can mains voltage be connected?

No. The instructions specify only 12V low-voltage wiring.

Does two wires mean a generic button will work?

No. The exact control technology must match.

Does it replace safety sensors?

No. Required protection remains independent.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products