LiftMaster 02409 /02-409 Key Switch — Constant-Pressure Open/Close Control

LiftMaster 02409 /02-409 Key Switch — Constant-Pressure Open/Close Control

$213.00
Skip to product information
LiftMaster 02409 /02-409 Key Switch — Constant-Pressure Open/Close Control

LiftMaster 02409 /02-409 Key Switch — Constant-Pressure Open/Close Control

02409
$213.00
Shipping calculated at checkout.

The LiftMaster 02409 is the two-position outdoor surface-mount key-control station identified in manufacturer accessory literature for constant-pressure open and close operation. It returns to the center position and allows key removal there. Its NEMA4/12 enclosure and standard-cylinder configuration must be matched to the actual installation. This station is distinct from a key control with a separate stop button. On a momentary-contact control scheme, it may leave no means of stopping movement unless the required additional stop control is provided.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Approved constant-pressure open/close circuits Match exact operator instructions.
Momentary-contact direction wiring Requires proper separate stop provision;do not assume safe use.
02410 withstop button Different station and function.
Outdoor surface mount Preserve proper enclosure entries and mounting.
Othercylinder versions Separate options;confirm supplied configuration.

Verify the Control Scheme and How Movement Will Stop

Record the operator model and actual control-wiring type before ordering. Have a qualified installer determine whether the station’s constant-pressure behavior matches the required commands. A familiar key or weather-rated box does not establish that the contact behavior is suitable. Do not select the station merely because it can be connected to open and close terminals.

The manufacturer accessory literature warns about the absence of a stopping means when used on momentary-contact arrangements without an additional stop control. Have the complete control scheme reviewed before installation. Preserve the required visibility and safe station position, then test open, close, release and stop behavior under controlled conditions. Required safety sensing remains a separate function and must also be tested before normal use.

Specifications and Product Identification

Specification Details
Supplier SKU 02409
Associated reference 02-409
Control Open /close;spring return to center
Key removal Center position only
Mounting/enclosure Outdoor surface mount, NEMA4/12
Application restriction Constant-pressure open and close;exact wiring required

Before Ordering

  • Record complete operator and actual wiring type.
  • Confirm constant-pressure open/close application.
  • Establish the required separate stop function where applicable.
  • Confirm standard-cylinder package and correct outdoor mounting.

Package Contents and Separate Requirements

This offer identifies the 02409 key-control station. Confirm the current switch, enclosure, cylinder, keys and fastening inventory before ordering. A separate stop station, field wiring, site-specific fittings, receiver and operator are not promised as included. Alternative cylinder options and a different key station with a stop button are separate offers. Establish the complete control arrangement before choosing this component as a replacement.

Safety Warnings — Read Before Installation or Service

  • WARNING: This station can leave no stopping means on an unsuitable momentary-contact circuit. Use the exact approved control scheme and required separate stop control.
  • Installation and electrical connections require qualified personnel. Isolate applicable power before work.
  • Do not bypass protection orassume that releasing the key stops every operator configuration. Verify actual behavior.
  • Test open, close, release, stop and all required safety responses before returning the door or gate to service.

Related Products and Important Differences

Frequently Asked Questions

Does it include a separate stop button?

It is the open/close station;do not confuse it with02410.

What happens when the key is released?

The key returns to center, but stopping behavior depends on the exact control circuit.

Where can the key be removed?

The manufacturer description specifies the center position.

Can it fit any momentary-contact control?

Do not assume so. The stopping provision must be assessed.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products