LiftMaster 02-406-3 Replacement Key Set — Two Keys for the Matched Control-Station Lock

LiftMaster 02-406-3 Replacement Key Set — Two Keys for the Matched Control-Station Lock

$45.78
Skip to product information
LiftMaster 02-406-3 Replacement Key Set — Two Keys for the Matched Control-Station Lock

LiftMaster 02-406-3 Replacement Key Set — Two Keys for the Matched Control-Station Lock

02-406-3
$45.78
Shipping calculated at checkout.

The LiftMaster 02-406-3 supplier offer is a two-key replacement set for the matching 02-406 control-station lock arrangement. These are physical lock keys, not a complete key-operated control station or an electronic access credential. Confirm the existing lock identification and required key code before ordering; the LiftMaster brand or station appearance alone does not establish that a replacement key will turn the installed cylinder. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Matching02-406 lock arrangement Verify the installed cylinder and required key reference.
Older or replaced cylinders A station model alone may not identify the current lock.
Other02-406 key sets Do not omit the suffix or assume equivalent keying.
Other operator cabinet locks No universal LiftMaster lock compatibility established.

Identify the Assembly and Plan the Repair

Read any available marking on the existing key and lock, and provide clear photographs when requesting fit confirmation. A control station may retain its original enclosure while its cylinder has been replaced. Identify the actual lock before ordering rather than selecting keys only from the date or appearance of the station.

A replacement key restores physical access or authorized switch operation only when the cylinder matches and is functioning correctly. It does not rekey the lock or invalidate a missing key. If access security is the concern, evaluate whether cylinder replacement is needed. Do not force a key into a sticking lock or assume new keys will repair a damaged mechanism.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference 02-406-3
Supplier package Two keys
Ordering reference 02-406-3
Selection basis Existing cylinder and exact key identification
Separate item Complete02-406 control station

Before Ordering

  • Match the full 02-406-3 reference.
  • Check the existing key and cylinder identification.
  • Confirm the supplier’s two-key package.
  • Decide whether replacement keys or a lock change is required.

Package Contents and Separate Requirements

The source offer identifies two keys. A control station, lock cylinder, switch contacts, enclosure and wiring are separate. Confirm exact keying before purchase, especially where the original cylinder has been replaced. The two-key quantity is the supplied offer; the -3 suffix is part of the ordering reference and is not a carton count.

Safety Warnings — Read Before Installation or Service

  • WARNING: A key-operated station may command immediate door movement. Operate only with the entrance visible, properly adjusted and clear of people.
  • Keep control-station keys away from children and unauthorized users. Store spare keys securely.
  • Do not force a sticking cylinder or defeat the station lock. Have damaged switch or lock components serviced by qualified personnel.
  • A key does not override safe operating requirements. Preserve all interlocks and protection devices, and verify normal authorized operation after service.

Related Products and Important Differences

Frequently Asked Questions

Does -3 mean three keys?

No. The supplied source offer specifies two keys.

Is the complete key station included?

No. This offer identifies the key set.

Will it rekey an existing lock?

No. Matching replacement keys do not change the cylinder’s keying.

Does a matching station model guarantee fit?

No. Confirm the actual installed cylinder and key identification.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products