Genie 19792A04.S Universal Garage Door Opener Door Bracket – Replacement Door-Arm Mounting Bracket

Genie

• Fast shipping — same-day on orders before 4:30 PM EST

• Product Description

  The Genie 19792A04.S Garage Door Opener Door Bracket is a replacement mounting bracket that attaches to the top section of a residential sectional garage door.

  The straight or curved opener door arm connects to this bracket, allowing the garage door opener to transfer its pulling and pushing force to the door as it opens and closes.

  This universal-style bracket can be used with Genie residential garage door openers and may also fit other residential opener systems using a compatible door-arm connection and mounting arrangement.

  Product Specifications

  • Manufacturer: Genie
  • Genie part number: 19792A04.S
  • Alternate marking: 19792A04
  • Product type: Garage door opener door bracket
  • Application: Residential sectional garage doors
  • Mounting location: Upper garage door section
  • Function: Connects the opener door arm to the garage door
  • Package quantity: One door bracket
  • Door arm: Not included
  • Clevis pin and fasteners: Not included unless specifically shown or stated

  Common Uses

  This bracket may be used to replace a door bracket that is:

  • Bent or distorted
  • Cracked or broken
  • Missing from the garage door
  • Pulling away from the door section
  • Damaged around the door-arm connection
  • No longer securely holding the opener arm

  It may also be used when installing a compatible residential garage door opener on a properly reinforced sectional garage door.

  Compatibility and Fitment

  Genie identifies the 19792A04.S as a universal door bracket for residential garage door opener applications.

  It is commonly used with:

  • Genie chain-drive openers
  • Genie belt-drive openers
  • Genie screw-drive openers
  • Compatible AC and DC residential operators
  • Straight and curved residential opener door arms
  • Sectional overhead garage doors with adequate top-section reinforcement

  The bracket has also been associated with Genie models and product families such as:

  • ISD1000
  • IntelliG series
  • ChainMax series
  • SilentMax series
  • PowerMax series
  • TriloG series
  • Selected older Genie screw-drive operators

  Compatibility still depends on the garage door construction, mounting-hole arrangement, door-arm style, and available reinforcement.

  Important Matching Notes

  Before ordering, verify:

  • The original bracket number, when available
  • The garage door is a sectional overhead door
  • The opener uses a compatible straight or curved door arm
  • The bracket mounting pattern is suitable for the door
  • The top door section is properly reinforced
  • The door arm, clevis pin, and retaining hardware are in usable condition

  Do not match this part by appearance alone when replacing a specialized or heavy-duty operator bracket.

  Door Reinforcement Requirements

  The opener bracket should not be attached only to thin garage door skin or an unsupported section of the door.

  Depending on the garage door manufacturer and construction, installation may require:

  • A vertical opener reinforcement bracket
  • A reinforced center stile
  • A horizontal reinforcement strut
  • Through-bolts with suitable backing
  • Manufacturer-approved mounting hardware

  Improper mounting can cause the fasteners to pull through the door panel, damage the top section, or allow the opener arm to separate from the door.

  Package Contents

  • One Genie 19792A04.S garage door opener door bracket

  The opener arm, clevis pin, retaining clip, reinforcement bracket, and mounting fasteners are not included unless specifically stated in the listing.

  Installation Notes

  1. Close the garage door completely.
  2. Disconnect electrical power from the garage door opener.
  3. Pull the emergency release to disconnect the opener from the door.
  4. Support or secure the existing opener arm.
  5. Remove the damaged door bracket.
  6. Inspect the top door section for cracks, distortion, or pulled fasteners.
  7. Repair or reinforce the door section as necessary.
  8. Position the replacement bracket according to the opener and garage door manufacturer’s instructions.
  9. Secure the bracket using appropriate fasteners and backing support.
  10. Reconnect the opener arm using the proper clevis pin and retaining clip.
  11. Reconnect the opener and restore electrical power.
  12. Test travel limits, force reversal, photo-eye operation, and manual release operation.

  Do not reuse damaged, undersized, loose, or corroded mounting hardware.

  Safety Warning

  A loose or improperly installed opener door bracket can separate from the garage door while the opener is operating, causing door damage or personal injury.

  Disconnect electrical power before servicing the opener or door-arm assembly. Do not loosen or adjust garage door springs, cables, drums, bottom brackets, or other components under tension.

  If the upper door section is damaged, cracked, bent, or insufficiently reinforced, have the door inspected and repaired by a qualified garage door technician before operating the opener.

   Genie 19792A04.S Universal Garage Door Opener Door Bracket

   Shop the Genie 19792A04.S universal garage door opener door bracket. Connects the opener door arm to the reinforced top section of a residential sectional garage door.