SSC 7' Garage Door Extension Spring – 200 lb – 25-42 Series – Tan – Double Loop

🇺🇸 Made in USA

This SSC garage door extension spring is designed for compatible sectional garage doors approximately 7 feet highrequiring a 200 lb spring rating.

Manufactured by Service Spring Corporation (SSC), this spring belongs to the 25-42 Series and features durable double-loop ends for compatible extension-spring systems.

The spring is manufactured from black-coated, oil-tempered spring wire, uses the Tan identification color for the 200 lb rating, and is rated for a minimum of 10,000 operating cycles.

Specifications

25-42 Series for 7' High Doors

This spring is part of SSC's 25-42 Series, designed for compatible 7-foot-high sectional garage doors.

The 25-42 designation identifies the spring series and should not be treated as a literal physical measurement.

Correct replacement should be based on the complete spring specification, including:

• Door height

• Spring series

• Required pull rating

• End configuration

• Existing spring setup

• Door counterbalance requirements

200 lb Pull Rating

This spring provides a 200 lb pull rating and is intended for heavier garage door applications requiring this specific counterbalance capacity.

Using the wrong spring rating can cause:

• Heavy manual operation

• A door that rises unexpectedly

• Uneven lifting

• Incorrect cable tension

• Excessive opener strain

• Premature pulley and hardware wear

Always verify the required spring rating before ordering.

Tan Color Code

The Tan identification color corresponds to the 200 lb extension-spring rating for this configuration.

Extension-spring colors repeat across different weight ranges, so color alone should never determine the correct replacement spring.

Before ordering, confirm:

• 7' door application

• 25-42 Series

• 200 lb pull rating

• Tan identification

• Double-loop ends

Double-Loop Ends

This version features double-loop ends for attachment to compatible extension-spring hardware.

Clips are not included with this configuration.

Compare your existing spring and attachment hardware before ordering to make sure the replacement end style matches your current system.

How Extension Springs Work

Extension springs are typically installed alongside the horizontal tracks on both sides of a sectional garage door.

As the door closes, the springs stretch and store mechanical energy. As the door opens, that stored energy helps lift and counterbalance the weight of the door.

A properly matched extension-spring system helps provide:

• Smooth door travel

• Proper counterbalance

• Correct cable tension

• Easier manual operation

• Reduced strain on the garage door opener

Compatibility & Fitment

Extension springs are not universal.

This spring should be selected when your system specifically requires:

• 7' high garage door

• 25-42 Series

• 200 lb pull rating

• Tan color code

• Double-loop ends

Also inspect the existing:

• Lift cables

• Pulleys

• Safety containment cables

• Spring attachment points

• Track hardware

• Rear supports

• Fasteners

Replace worn or damaged components before returning the door to service.

Replace Extension Springs in Pairs

For garage doors using two extension springs, replacing both springs as a matching pair is generally recommended.

Both springs normally experience approximately the same number of operating cycles. Pairing one new spring with one fatigued spring can result in:

• Uneven lifting force

• Unequal cable tension

• Crooked door travel

• Poor door balance

• Increased hardware wear

Safety Cables Strongly Recommended

Extension-spring systems should use properly installed safety containment cables running through each spring.

If an extension spring breaks, the safety cable helps contain the spring and reduces the risk of it becoming a dangerous projectile.

Inspect existing safety cables whenever replacing extension springs.

Ready to Order?

If your existing system requires a 7' door, SSC 25-42 Series extension spring, 200 lb rating, Tan identification, and double-loop ends, this spring is ready for your repair.

Add it to your cart today and restore proper garage door counterbalance with the correct SSC-made extension spring.

Before ordering, double-check:

• 7' door height

• 25-42 Series

• 200 lb pull rating

• Tan color code

• Double-loop ends

Safety Warning

⚠️ Garage door extension springs operate under substantial tension and can cause severe injury, death, or property damage if improperly handled.

Never remove an extension spring, pulley, lift cable, or attachment point while the spring is stretched.

Secure the garage door and fully release spring tension before servicing the extension-spring system.

Installation should be performed by a qualified person familiar with garage door extension springs, safety containment cables, and proper installation procedures.