SSC 7' Garage Door Extension Spring – 130 lb – 25-42 Series – Yellow – Open Loop
🇺🇸 Made in USA
This SSC garage door extension spring is designed for compatible sectional garage doors approximately 7 feet highrequiring a 130 lb spring rating.
Manufactured by Service Spring Corporation (SSC), this spring belongs to the 25-42 Series and features a single open-loop end configuration for compatible extension-spring systems.
The spring is manufactured from black-coated spring wire, uses the Yellow identification color for the 130 lb rating, and is rated for an industry-standard minimum lifecycle of 10,000 operating cycles.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Service Spring Corporation (SSC) |
| Spring Type | Extension Spring |
| Door Height | 7' |
| Spring Series | 25-42 Series |
| Pull Rating | 130 lb |
| Color Code | Yellow |
| End Style | Single Open Loop |
| Clips Included | No |
| Finish | Black Coated |
| Minimum Cycle Rating | 10,000 Cycles |
| Made In | USA |
25-42 Series for 7' High Doors
This spring is part of SSC's 25-42 Series, designed for compatible 7-foot-high sectional garage doors.
Correct replacement should be based on the complete spring specification, including:
-
Door height
-
Spring series
-
Required pull rating
-
End configuration
-
Existing spring setup
-
Door counterbalance requirements
130 lb Pull Rating
This spring provides a 130 lb pull rating.
Using the correct spring rating is essential for proper door balance. An incorrectly rated extension spring can result in:
-
A door that feels excessively heavy
-
A door that rises unexpectedly
-
Uneven lifting
-
Incorrect cable tension
-
Excessive opener strain
-
Premature pulley and hardware wear
Always confirm the required spring rating before installation.
Yellow Color Code
The Yellow identification color corresponds to the 130 lb rating in the standard extension-spring color-code system.
Color coding is useful for identifying an existing spring, but color alone should never determine the replacement.
Confirm:
-
7' door application
-
25-42 Series
-
130 lb pull rating
-
Yellow identification
-
Open-loop configuration
Single Open-Loop Ends
This version uses single open-loop ends for attachment to compatible garage door extension-spring hardware.
Clips are not included with this version.
SSC also manufactures double-loop and clipped-end configurations, so compare your existing spring attachment style carefully before ordering.
How Extension Springs Work
Extension springs are normally installed alongside the horizontal tracks on both sides of a sectional garage door.
As the door closes, the springs extend and store mechanical energy. As the door opens, that stored energy helps lift and counterbalance the weight of the door.
A correctly matched extension-spring system helps provide:
-
Smooth door movement
-
Proper counterbalance
-
Reduced garage door opener strain
-
Correct cable tension
-
Easier manual operation
Compatibility & Fitment
Extension springs are not universal.
This spring should be selected when your garage door system specifically requires:
-
7' high garage door
-
25-42 Series
-
130 lb pull rating
-
Yellow color code
-
Single open-loop ends
Also inspect the existing:
-
Lift cables
-
Pulleys
-
Safety cables
-
Spring attachment points
-
Track hardware
-
Rear supports and fasteners
Replace worn or damaged hardware before returning the door to service.
Replace Extension Springs in Pairs
For garage doors using two extension springs, replacing both springs as a matching pair is generally recommended.
Both springs normally experience approximately the same number of operating cycles. If one spring breaks or becomes weak, the opposite spring may already be fatigued.
Using one new spring with one worn spring can cause:
-
Uneven lifting force
-
Unequal cable tension
-
Crooked door travel
-
Poor door balance
-
Increased hardware wear
Safety Cables Strongly Recommended
Extension-spring systems should use properly installed safety containment cables running through each spring.
If a spring breaks, the safety cable helps contain it and reduces the risk of the spring becoming a dangerous projectile.
Inspect existing safety cables whenever replacing extension springs.
Ready to Order?
If your existing system requires a 7' door, SSC 25-42 Series extension spring, 130 lb rating, Yellow identification, and single open-loop configuration, this spring is ready for your repair.
Add it to your cart today and restore proper garage door counterbalance with the correct SSC-made extension spring.
Before ordering, double-check:
-
7' door height
-
25-42 Series
-
130 lb pull rating
-
Yellow color code
-
Single open-loop ends
Safety Warning
⚠️ Garage door extension springs operate under substantial tension and can cause severe injury, death, or property damage if improperly handled.
Never remove an extension spring, pulley, lift cable, or attachment point while the spring is stretched.
Secure the garage door and fully release spring tension before servicing the extension-spring system.
Installation should be performed by a qualified person familiar with garage door extension springs, safety containment cables, and proper installation procedures.
SEO Title: SSC 130 lb 7' Extension Spring – 25-42 Series – Yellow
Meta Description: SSC 130 lb garage door extension spring for 7' doors. 25-42 Series, Yellow color code, single open-loop ends, black coated, 10,000-cycle minimum, Made in USA.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection