SSC 8' Garage Door Extension Spring – 290 lb – 27-48 Series – Light Blue – Clips Included
🇺🇸 Made in USA
This SSC garage door extension spring is designed for compatible sectional garage doors approximately 8 feet highrequiring a 290 lb spring rating.
Manufactured by Service Spring Corporation (SSC), this heavy-duty spring belongs to the 27-48 Series and is supplied with clips for compatible extension-spring installations.
The spring uses the Light Blue identification color corresponding to the 290 lb pull rating and is rated for an industry-standard minimum lifecycle of 10,000 operating cycles.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Service Spring Corporation (SSC) |
| Spring Type | Extension Spring |
| Door Height | 8' |
| Spring Series | 27-48 Series |
| Pull Rating | 290 lb |
| Color Code | Light Blue |
| Clips Included | Yes |
| Minimum Cycle Rating | 10,000 Cycles |
| Made In | USA |
27-48 Series for 8' High Doors
This spring is part of SSC's 27-48 Series, intended for compatible 8-foot-high sectional garage doors.
The 27-48 designation identifies the spring series and should not be treated simply as a physical measurement.
Correct spring selection should be based on the complete specification, including:
-
Door height
-
Spring series
-
Required pull rating
-
Attachment configuration
-
Existing spring setup
-
Actual door counterbalance requirements
290 lb Pull Rating
This spring provides a 290 lb pull rating and is intended for heavier garage door applications requiring this specific counterbalance capacity.
Using an incorrectly rated extension spring can cause:
-
Heavy manual door operation
-
A door that rises unexpectedly
-
Poor door balance
-
Uneven cable tension
-
Excessive opener strain
-
Premature pulley and hardware wear
Always verify the required spring rating before installation.
Light Blue Color Code
The Light Blue identification color corresponds to the 290 lb extension-spring rating.
Extension-spring colors repeat at different weight ranges, so color alone should never be used to select a replacement spring.
Before ordering, confirm:
-
8' door application
-
27-48 Series
-
290 lb pull rating
-
Light Blue identification
-
Clips required
Clips Included
This version is supplied with clips for compatible extension-spring installation.
Compare your existing spring and attachment hardware before ordering to make sure the replacement configuration matches the original system.
Heavy-Duty Extension Spring Application
A 290 lb extension spring is intended for substantially heavier applications than common light-duty residential extension springs.
Correct spring selection depends on the actual garage door weight and counterbalance requirements.
Do not substitute this spring for a lighter-rated spring simply because the springs appear similar.
How Extension Springs Work
Extension springs are typically installed alongside the horizontal tracks on both sides of a sectional garage door.
As the door closes, the springs stretch and store mechanical energy. As the door opens, that stored energy helps lift and counterbalance the door.
A correctly matched extension-spring system helps provide:
-
Smooth door travel
-
Proper counterbalance
-
Reduced opener strain
-
Correct cable tension
-
Easier manual operation
Compatibility & Fitment
Extension springs are not universal.
This spring should be selected when your system specifically requires:
-
8' high garage door
-
27-48 Series
-
290 lb pull rating
-
Light Blue color code
-
Clip-equipped configuration
Also inspect the existing:
-
Lift cables
-
Pulleys
-
Safety containment cables
-
Spring attachment points
-
Track hardware
-
Rear track supports
-
Fasteners
Replace worn or damaged components before returning the door to service.
Replace Extension Springs in Pairs
If the garage door uses two extension springs, replacing both springs as a matching pair is generally recommended.
Both springs normally experience approximately the same number of operating cycles. If one spring fails or weakens, the opposite spring may already be fatigued.
Using one new spring with one worn spring can result in:
-
Uneven lifting force
-
Unequal cable tension
-
Crooked door movement
-
Poor door balance
-
Increased hardware wear
Safety Cables Strongly Recommended
Extension-spring systems should use properly installed safety containment cables running through each spring.
If an extension spring breaks, the safety cable helps contain the spring and reduces the risk of it becoming a dangerous projectile.
Inspect existing safety cables whenever replacing extension springs.
Ready to Order?
If your existing system requires an 8' door, SSC 27-48 Series extension spring, 290 lb rating, Light Blue identification, and clips, this spring is ready for your repair.
Add it to your cart today and restore proper garage door counterbalance with the correct SSC-made extension spring.
Before ordering, double-check:
-
8' door height
-
27-48 Series
-
290 lb pull rating
-
Light Blue color code
-
Clips required
Safety Warning
⚠️ Garage door extension springs operate under substantial tension and can cause severe injury, death, or property damage if improperly handled.
Never remove an extension spring, pulley, lift cable, clip, or attachment point while the spring is stretched.
Secure the garage door and fully release spring tension before servicing the extension-spring system.
Installation should be performed by a qualified person familiar with garage door extension springs, containment cables, and proper installation procedures.
SEO Title: SSC 290 lb 8' Extension Spring – 27-48 Series – Light Blue
Meta Description: SSC 290 lb extension spring for 8' garage doors. 27-48 Series, Light Blue color code, clips included, minimum 10,000 cycles, Made in USA.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection