Digi-Code DC-5202 Wireless Keyless Entry – 310 MHz – Stanley Compatible

The Digi-Code DC-5202 Wireless Keyless Entry provides convenient keyless access to compatible garage door openers and gate operators using 310 MHz fixed-code radio technology.

Designed for compatible Digi-Code and Stanley 310 MHz systems, the keypad allows users to open the garage door or gate by entering a programmable personal identification number instead of carrying a handheld remote.

Its weather-resistant flip-up cover protects the keypad when mounted outdoors, making it a practical replacement or additional access control for residential garages, gates, workshops, and compatible commercial applications.

Specifications

Keyless Garage Door & Gate Access

The DC-5202 lets authorized users operate a compatible garage door or gate without carrying a remote transmitter.

Simply enter the programmed PIN on the keypad to send the opening command to the compatible receiver.

This makes it especially useful for:

• Family members

• Contractors

• Employees

• Rental properties

• Workshops

• Detached garages

• Gated properties

• Locations where carrying a remote is inconvenient

310 MHz Fixed-Code System

The DC-5202 operates at 310 MHz and is designed for compatible fixed-code radio systems.

It works with compatible:

• Digi-Code 310 MHz receivers

• Stanley 310 MHz garage door openers

• Stanley-compatible fixed-code receivers

• Compatible gate operators equipped with an appropriate 310 MHz receiver

10 DIP Switch Programming

The keypad uses 10 DIP switches to establish the radio code used by the receiver.

Ten ON/OFF switches provide 1,024 possible code combinations.

For proper operation, the DIP-switch pattern in the keypad must match the code programmed into the compatible receiver or existing transmitter.

Important Compatibility Note

310 MHz alone does not guarantee compatibility.

Before ordering, verify that your existing system uses:

• 310 MHz frequency

• 10 DIP switches

• Compatible Digi-Code or Stanley fixed-code technology

This keypad is not designed simply to replace every wireless keypad operating at 310 MHz.

Different manufacturers may use different coding technologies even when the operating frequency is the same.

Not a Learn-Button or Rolling-Code Keypad

The DC-5202 uses traditional fixed-code DIP-switch programming.

It is not designed for modern systems using technologies such as:

• LiftMaster Security+

• LiftMaster Security+ 2.0

• Genie Intellicode

• Linear MegaCode

• Modern rolling-code Stanley systems

• App-only smart garage controls

If your existing opener uses a learn button instead of DIP switches, verify compatibility before purchasing.

User-Programmable PIN

The keypad allows the user to create a private PIN for garage door or gate access.

This provides convenient access without:

• Carrying keys

• Leaving a remote outside

• Giving every user a handheld transmitter

The PIN can be changed when needed according to the Digi-Code programming instructions.

Weather-Resistant Flip Cover

The DC-5202 features a protective flip-up cover designed to shield the keypad from weather and accidental button presses.

The keypad is designed for exterior mounting near a compatible:

• Garage door

• Driveway gate

• Pedestrian gate

• Workshop entrance

• Controlled-access area

Install the keypad where it can be reached conveniently while remaining clear of the moving garage door or gate.

Battery Powered

The keypad operates from an included 9V alkaline battery.

Because the unit is wireless and battery powered, there is normally no need to run control wiring from the keypad to the garage door opener or gate operator.

Battery life depends on usage frequency, temperature, weather exposure, and battery condition.

Compatibility With Digi-Code Systems

The DC-5202 is designed to operate compatible Digi-Code 310 MHz receivers.

One commonly matched receiver is the Digi-Code 310 MHz fixed-code receiver family using the same 10-DIP-switch / 1,024-code format.

Stanley Compatibility

The DC-5202 is also designed for compatible Stanley garage door opener systems using 310 MHz and 10 DIP switches.

This makes it particularly useful when replacing an older Stanley wireless keypad that is no longer readily available.

Before ordering, open the existing remote or receiver and verify the frequency and DIP-switch configuration.

Installation

Typical installation involves:

1. Choose a mounting location near the garage door or gate.

2. Open the keypad's programming compartment.

3. Set the 10 DIP switches to match the compatible receiver or working remote.

4. Program your personal PIN according to the supplied instructions.

5. Mount the keypad using the included screws.

6. Test operation while the garage door or gate is fully visible.

No hardwired connection to the operator is normally required.

What's Included

Package includes:

• (1) Digi-Code DC-5202 Wireless Keypad

• 9V Battery

• Mounting Screws

• Programming / Installation Instructions

Garage door opener, gate operator, receiver, and handheld remotes are not included.

Ready to Order?

If your existing system uses 310 MHz, 10 DIP switches, and compatible Digi-Code or Stanley fixed-code technology, the DC-5202 is a convenient way to add or restore wireless keyless entry.

Add it to your cart today and regain convenient PIN-based access to your garage door or gate without carrying a remote.

Before purchasing, double-check:

• 310 MHz frequency

• 10 DIP switches

• Fixed-code system

• Digi-Code or compatible Stanley receiver

If any of these specifications differ from your existing system, verify compatibility before ordering.

Safety Note

Always test the keypad while the garage door or gate is fully visible.

Do not bypass photo eyes, safety edges, entrapment-protection devices, or other required safety equipment.

Make sure the keypad is mounted where the user cannot reach through, over, under, or around a moving garage door or gate while operating it.

SEO Title: Digi-Code DC-5202 Wireless Keypad 310 MHz – Stanley Compatible

Meta Description: Digi-Code DC-5202 wireless keyless entry keypad for compatible 310 MHz Digi-Code and Stanley systems. 10 DIP switches, programmable PIN, battery and mounting hardware included.