5-7/8" Torsion Spring Stationary Cone – Right-Hand Wound, OHD Style

This OHD-style stationary cone is designed for compatible right-hand-wound torsion springs with a 5-7/8-inch inside diameter. It secures the fixed end of the spring to the center bearing plate or spring anchor bracket.

Specifications

• Spring inside diameter: 5-7/8"

• Spring wind: Right hand

• Cone type: Stationary cone

• Style: OHD

• Maximum compatible wire size: .453"

• Quantity: One stationary cone

Compatibility

Use only with a compatible 5-7/8-inch-ID, right-hand-wound torsion spring using the appropriate OHD-style hardware.

Verify the spring’s inside diameter, wind direction, wire size, shaft diameter and cone style before ordering. OHD-style cones should not be assumed interchangeable with cones made for other overhead-door systems.

Pair this stationary cone with the corresponding 5-7/8" Torsion Spring Winding Cone – Right-Hand Wound, OHD Stylewhen replacing both fittings on the same spring.

Installation and Safety

Stationary cones are part of a high-tension counterbalance system. Installation should be completed by a trained garage-door professional.

The spring must be fully controlled and safely unwound before removing the stationary-cone fasteners. Inspect the center bearing plate, shaft, spring anchor bracket and mounting hardware before the system is returned to service.