LCE3 Interior 3-Button Commercial Garage Door Control Station – Open / Close / Stop, Flush Mount

The LCE3 is a commercial-grade three-button control station designed for compatible commercial garage door operators, industrial overhead doors, gate operators, and other equipment requiring dedicated OPEN, CLOSE, and STOP controls.

Its compact flush-mount, single-gang design provides a clean installation, while the momentary-contact buttons give direct control of compatible operator circuits.

Product Features

• Commercial 3-button wall control station

• Dedicated OPEN / CLOSE / STOP buttons

• Momentary-contact operation

• Flush-mount installation

• Fits a standard single-gang electrical box

• Plastic faceplate

• NEMA 1 rated

• Designed for interior installations

• Color-coded buttons for easier identification

• Suitable for commercial garage door and gate operators

• Compact professional wall-control design

Specifications

• Model: LCE3

• Product Type: 3-Button Commercial Control Station

• Functions: Open / Close / Stop

• Mounting: Flush Mount

• Location: Interior

• NEMA Rating: NEMA 1

• Button Type: Momentary Contact

• Button Rating: 5A @ 125VAC

• Faceplate Material: Plastic

• Faceplate Height: Approximately 4-1/2"

• Faceplate Width: Approximately 2-3/4"

• Back Box Height: Approximately 4-1/4"

• Back Box Width: Approximately 2-1/2"

• Back Box Type: Single Gang

Open / Close / Stop Operation

The three dedicated buttons provide direct control of a compatible commercial operator:

• OPEN – initiates opening

• CLOSE – initiates closing

• STOP – stops door movement

The exact wiring configuration depends on the operator or control board being used.

Flush-Mount Design

The LCE3 installs into a standard single-gang wall box, allowing most of the control-station body to sit inside the wall.

This creates a cleaner, lower-profile installation compared with a surface-mounted control station.

Common Applications

Suitable for compatible:

• Commercial sectional garage doors

• Industrial overhead doors

• Rolling steel doors

• Commercial garage door operators

• Automatic gate operators

• Warehouse entrances

• Loading dock doors

• Automotive service facilities

• Manufacturing facilities

• Commercial access systems

Compatibility

The LCE3 is designed for equipment that accepts traditional OPEN / CLOSE / STOP hard-wired control inputs.

Before ordering, verify:

• Operator control voltage

• Open / Close / Stop circuit requirements

• Momentary-contact compatibility

• Available wall-box dimensions

• Interior installation location

Do not assume compatibility based only on the operator brand.

Interior NEMA 1 Enclosure

The LCE3 is NEMA 1 rated and intended for dry indoor locations.

It should not be installed outdoors or in wet, wash-down, or weather-exposed areas requiring a NEMA 3R, NEMA 4, or similar weather-resistant control station.

Package Contents

• 1 – LCE3 Three-Button Commercial Control Station

• Single-gang back box

Control wiring, conduit, operator, and other installation accessories are sold separately.

Important Installation Note

Disconnect operator power before installation or servicing.

Wire the OPEN, CLOSE, and STOP circuits according to the operator manufacturer's wiring diagram. After installation, test all three control functions and all required entrapment-protection devices before returning the door or gate to normal service.

This control station is an activation device and does not replace required photo eyes, monitored sensing edges, light curtains, or other safety equipment.