2-1/4" Raynor-Style Torsion Spring Cone Set – Right-Hand Wound, Two Pieces

Complete or repair a compatible 2-1/4-inch Raynor-style right-hand-wound torsion spring with this two-piece SSC cone set. The set includes the winding cone required to apply spring tension and the stationary cone used to anchor the fixed end of the spring.

Specifications:

• Spring inside diameter: 2-1/4"

• Spring wind: Right-hand wound

• Style/application: Raynor-style torsion-spring system

• Set contents: One winding cone and one stationary cone

• Maximum spring wire size: .3125"

• Quantity: One two-piece cone set

• Manufacturer: Service Spring Corporation / SSC

• Product number: 189925

• Country of manufacture: Made in the USA 🇺🇸

This set is specifically intended for a right-hand-wound spring. Spring wind describes the direction of the coils and should be confirmed from the original spring and cone markings rather than assumed from the spring’s position on the door.

Only the winding and stationary cones are included. The torsion spring, shaft, bearing, spring anchor bracket, mounting hardware, and winding bars must be supplied separately.

Before ordering, verify the 2-1/4-inch spring inside diameter, right-hand wind, maximum wire size, Raynor-style configuration, cone bore, and mounting dimensions. The corresponding left-hand-wound cone set is a different product.

Torsion-spring components are under extreme force during operation. Installing cones and winding the completed spring should be performed only by a qualified garage door technician with the proper tools and training.

Order SSC 189925 when the approved application requires a two-piece Raynor-style cone set for a 2-1/4-inch right-hand-wound torsion spring.