SSC .2830 x 1.75″ ID x 120″ Torsion Spring – Right Wind – Light Blue
SSC .2830 x 1.75″ ID x 120″ Torsion Spring – Right Wind – Light Blue
🇺🇸 Made in USA
Manufactured by Service Spring Corporation (SSC), this .2830″ wire x 1.75″ inside diameter x 120″ right-wind torsion spring is a long-length option for professionally specified counterbalance applications.
The listed 120-inch body length equals 10 feet. This dimension identifies the spring length, not the height of the door or a universal lifting capacity. Verify the complete application before selecting this product.
Features & Benefits
-
.2830″ wire diameter.
-
Light-blue wire-size identification.
-
1.75″ inside diameter.
-
Listed spring-body length: 120″.
-
Right-wind configuration.
-
Coated, oil-tempered wire.
-
Winding and stationary cones listed as installed.
-
For applications with verified spring sizing and installation space.
Specifications
| Specification | Detail |
|---|---|
| Manufacturer | SSC — Service Spring Corporation |
| Wire diameter | .2830″ |
| Inside diameter | 1.75″ |
| Listed spring-body length | 120″ — 10 feet |
| Winding direction | Right Wind — RW |
| Wire-size color | Light Blue |
| Wire construction | Coated, oil-tempered |
| Cones | Listed with winding and stationary cones installed |
| Application | Professionally specified long-length torsion spring |
Cycle Life
The listing states a standard minimum 10,000-cycle classification. Actual cycle suitability must be verified for the final spring configuration, working turns, and loading.
The 120-inch length does not automatically make this an extended-cycle replacement. One cycle is one complete opening and closing.
Compatibility & Selection
Confirm .2830″ wire diameter, 1.75″ inside diameter, right-wind direction, and the required finished spring length. Determine whether the job calls for the full listed length or a separately specified custom assembly.
Right wind describes coil direction. It does not simply mean the spring installs on the right side of the door. A left-wind spring cannot be substituted at the same mounting position.
Verify shaft fit, cone compatibility, stationary mounting, and clearance for the spring’s operating length change. A spring with a 2″ inside diameter is not automatically equivalent, even if its wire size matches.
Pairing & Engineering Considerations
The complete counterbalance system must be calculated using door weight, height, cable drums, lift geometry, operating turns, and any companion springs.
Equal-size opposite-wind pairs are appropriate only when specified for the door. Some systems require unequal spring sizes or a different spring arrangement.
High-lift, vertical-lift, and changes to cable drums require separate calculations. Any modification to the supplied spring must be assessed and performed by a qualified spring professional.
Installation & Safety
Professional installation is required for safe handling of this specialized configuration. Torsion springs and connected components can release hazardous stored energy.
Do not loosen loaded cones, cable drums, lifting cables, or bottom fixtures. After installation, verify manual balance throughout travel, cable seating, clearances, and operator safety performance.
Contact us to confirm the supplied configuration, finished dimensions, and system fit before ordering this 120-inch SSC right-wind spring.
SSC .2830 x 1.75″ ID x 120″ Right-Wind Torsion Spring – Light Blue
American-made SSC long-length torsion spring with coated wire. Verify right-wind requirements, finished dimensions, and available installation space before ordering.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection
