Spring Specifications

🇺🇸 MADE IN USA | Manufactured by Service Spring Corporation (SSC)

The SSC Right Wind .2343 x 2.00" x 32" Torsion Spring is a professional-grade replacement spring manufactured in the United States by Service Spring Corporation (SSC).

It is made from durable coated, oil-tempered spring steel and includes both the winding cone and stationary cone pre-installed.

This spring is designed for residential sectional garage door torsion systems requiring a .2343" wire diameter, 2.00" inside diameter, 32" spring length, and Right Wind configuration.

Features

• Manufacturer: Service Spring Corporation (SSC)
• Made in USA
• Wind Direction: Right Wind (RW)
• Wire Diameter: .2343"
• Inside Diameter: 2.00"
• Spring Length: 32"
• Coated oil-tempered spring steel
• Winding cone included and pre-installed
• Stationary cone included and pre-installed
• Professional-grade replacement torsion spring
• Color-coded and stenciled for identification
• Designed for residential sectional garage door systems
• Minimum standard lifecycle of approximately 10,000 cycles

How It Works

A torsion spring is part of the garage door counterbalance system.

When the door closes, the spring winds and stores mechanical energy. When the door opens, the spring releases that energy to help lift the weight of the door.

A properly sized torsion spring allows the garage door to operate smoothly and reduces the lifting force required from the garage door opener.

Incorrect spring sizing can cause poor door balance, excessive opener load, premature component wear, or unsafe operation.

Compatibility

This SSC torsion spring is not limited to one garage door brand.

It can be used with many residential sectional garage door systems when the required spring dimensions, wind direction, and torque specifications match the original system.

Compatible applications may include doors manufactured by:

• Clopay
• Amarr
• C.H.I. Overhead Doors
• Haas Door
• Raynor
• Midland Garage Door
• Northwest Door
• Martin Door
• DoorLink
• Delden
• Safe-Way
• Certain Wayne Dalton systems using conventional torsion springs
• Other residential sectional garage doors using standard torsion hardware

Compatibility is determined by the spring specifications and door requirements, not simply by the garage door brand.

Verify Before Ordering

Confirm all of the following before ordering:

• Wire diameter: .2343"
• Inside diameter: 2.00"
• Spring length: 32"
• Wind direction: Right Wind
• Door weight
• Door height
• Number of springs
• Cable drum type and size
• Track and lift configuration
• Required spring torque

If your existing spring is .2343" wire x 2.00" ID x 32" long and Right Wind, this spring may be a direct replacement when the original spring specifications are correct.

Do not select a torsion spring based only on door brand, appearance, or approximate dimensions.

Right Wind Identification

This product is a Right Wind (RW) torsion spring.

On a typical two-spring torsion system, a right-wound spring is commonly installed on the left side of the center bearing bracket when viewed from inside the garage facing the door.

Always verify the wind direction of your existing spring before ordering.

Applications

Suitable for:

• Residential sectional garage doors
• Broken torsion spring replacement
• Worn or fatigued torsion spring replacement
• Single-spring torsion systems when properly calculated
• Two-spring torsion systems when properly calculated
• Standard torsion shaft systems
• Professional garage door repair
• New installations requiring matching spring specifications

Specifications

Manufacturer: Service Spring Corporation (SSC)
Country of Manufacture: USA
Spring Type: Torsion Spring
Wind Direction: Right Wind (RW)
Wire Diameter: .2343"
Inside Diameter: 2.00"
Spring Length: 32"
Material: Oil-Tempered Spring Steel
Finish: Coated
Winding Cone: Included and Installed
Stationary Cone: Included and Installed
Minimum Rated Lifecycle: Approximately 10,000 cycles
Application: Residential Sectional Garage Door Systems

Package Contents

• 1 × SSC Right Wind .2343 x 2.00" x 32" Torsion Spring
• Pre-installed winding cone
• Pre-installed stationary cone

Quantity: One spring unless otherwise specified.

Installation Requirements

Installation requires:

• Proper torsion spring winding bars
• Appropriate hand tools
• Secure torsion shaft and bearing components
• Correct cable drum and lifting cable setup
• Proper spring winding procedure
• Final garage door balance testing

When replacing one spring in a two-spring system, inspect the condition and remaining service life of the opposite spring.

Installation & Safety

WARNING: Garage door torsion springs operate under extreme mechanical tension.

Improper installation, removal, adjustment, or winding can cause serious injury, death, or property damage.

Never loosen or adjust a winding cone without properly securing the torsion system and using correctly sized winding bars.

Installation should be performed by a qualified garage door technician or an experienced person familiar with torsion spring systems and proper safety procedures.