SSC Extended Cycle Springs® Technology: Features our exclusive manufacturing process that extends cycle life up to 1.5x compared to traditional oil-tempered springs. Engineered for professional-grade performance and durability.

Available only in Indianapolis & St. Louis

Spring Specifications

• Made in the USA
• All springs rated for an industry standard minimum lifecycle of 10,000 cycles
• Springs come with winding and stationary cones installed and are stenciled and color coded for easy identification
• Coated & oil tempered wire

Right-Wind Extended-Cycle Garage Door Torsion Spring — .225 Wire × 2-Inch ID × 27.25-Inch Length, Coated, Cones Installed

Spring Specifications

• Wind direction: Right wind
• Wire size: .225 inch
• Inside diameter: 2 inches
• Spring length: 27.25 inches
• Spring type: Extended-cycle torsion spring
• Wire material: Oil-tempered spring wire
• Finish: Coated
• Winding cone: Installed
• Stationary cone: Installed
• Application: Residential and light-commercial sectional garage doors
• Country of manufacture: USA
• Quantity: One torsion spring
• Product reference: DUR82110R5011

Product Description

This right-wind extended-cycle garage door torsion spring is designed for sectional garage door systems requiring a .225-inch wire size, 2-inch inside diameter, and 27.25-inch spring length.

The spring is manufactured from coated, oil-tempered wire and uses an extended-cycle manufacturing process intended to provide a longer operating life than a standard oil-tempered torsion spring.

The winding cone and stationary cone are already installed, allowing the spring to be prepared for professional installation once its specifications have been confirmed against the original spring or an engineered spring calculation.

Extended-cycle springs are particularly useful for garage doors that operate frequently, including doors used by active households, service facilities, small commercial buildings, workshops, and other high-use applications.

Size / Specification Chart

Common Uses

This spring may be used as a replacement component in properly engineered torsion spring systems for:

• Residential sectional garage doors
• Frequently operated household garage doors
• Light-commercial overhead doors
• Workshop and service-bay doors
• Storage-building doors
• Two-car garage doors
• Single-spring torsion systems
• Two-spring torsion systems

Actual compatibility depends on the complete spring calculation and not only the size or type of garage door.

Compatibility & Fitment

This torsion spring is compatible only with systems engineered for all of the following specifications:

• .225-inch wire diameter
• 2-inch inside diameter
• 27.25-inch spring body length
• Right-wind configuration
• Compatible torsion shaft and cone bore
• Correct cable drums and track system
• Correct torque requirement for the door weight

Do not select a replacement spring based only on door width, door height, color coding, or visual similarity.

The correct torsion spring depends on:

• Actual garage door weight
• Door height
• Cable drum model
• Track and lift configuration
• Number of springs
• Inside diameter
• Wire size
• Spring length
• Required inch-pounds per turn
• Intended cycle life

Important Matching Notes

A right-wind spring is commonly installed on the left side of the center support bracket when viewed from inside the garage facing the closed door. However, spring placement can vary with the torsion-system design.

Always confirm the wind direction from the spring itself rather than relying only on its mounting position.

The spring body length should be measured with all tension safely removed. Measure only the wound spring coils and do not include the winding cone or stationary cone.

A torsion spring with the wrong wire size, inside diameter, length, or wind direction may prevent the door from balancing correctly and can overload other components.

When replacing one spring in a two-spring system, inspect and verify the specifications and condition of both springs. Replacing springs as a properly matched pair may provide more consistent performance when both existing springs have similar age and usage.

Installation Notes

This spring includes the winding and stationary cones, but it does not include:

• Winding bars
• Torsion shaft
• Center bearing
• Center support bracket
• End bearing plates
• Cable drums
• Lift cables
• Bottom fixtures
• Mounting fasteners

Before installation, inspect the torsion shaft, bearings, drums, cables, brackets, and attachment points for wear or damage.

After installation, disconnect the garage door opener and test the door manually. A correctly balanced door should move smoothly and remain near the halfway-open position without rapidly rising or falling.

Final spring turns and adjustment must be determined from the door height, drum configuration, spring engineering, and manufacturer requirements.

Safety Warning

Garage door torsion springs operate under extreme stored energy. Improper removal, installation, winding, or adjustment can cause severe injury, death, or property damage.

Installation should be performed only by a trained garage door technician using properly sized solid-steel winding bars and established safety procedures.

Never use screwdrivers, ratchets, socket extensions, rebar, or other improvised tools to wind or unwind a torsion spring.

Right-Wind Extended-Cycle Garage Door Torsion Spring .225 × 2 × 27.25 Inches with Cones

Right-wind extended-cycle garage door torsion spring with .225-inch wire, 2-inch inside diameter, 27.25-inch length, coated oil-tempered wire, and installed cones.