SSC Right Wind (RW) .2070 x 1.75 x 120.00 Long-Length Coated Torsion Spring with Cones – Yellow

🇺🇸 Made in USA

Professional-grade Right Wind (RW) long-length torsion spring manufactured by Service Spring Corporation (SSC)for residential, commercial, and specialty overhead door counterbalance systems requiring a .2070 wire size, 1.75" inside diameter, and 120" spring length.

Manufactured from coated, oil-tempered spring wire for dependable torque, durability, and consistent performance. This spring is supplied with the winding and stationary cones installed and is stenciled and color coded for easier identification.

Spring Specifications

• Wind: Right Wind (RW)

• Wire Size: .2070"

• Wire Color Code: Yellow

• Inside Diameter (ID): 1.75"

• Spring Length: 120.00"

• Spring Type: Long-Length Torsion Spring

• Minimum Cycle Rating: 10,000 cycles

• Wire Type: Coated, oil-tempered spring wire

• Manufacturer: Service Spring Corporation (SSC)

• Cones: Winding and stationary cones installed

• Identification: Stenciled and color coded for easier identification

Long-Length Torsion Spring Applications

The 120" long-length configuration is designed for torsion systems requiring a substantially longer spring than typical residential stock sizes. These springs may be used in properly engineered residential, commercial, and specialty overhead door counterbalance systems when the required spring calculations call for these exact specifications.

Compatibility & Matching

Torsion springs must be selected according to wire size, inside diameter, spring length, wind direction, door weight, cable drum, track configuration, and lift type.

This spring is Right Wind (RW). Do not substitute a Left Wind spring simply because the wire size, diameter, and length are the same.

For replacement applications, verify the existing spring specifications or calculate the required spring before ordering. Spring length is measured along the spring body and does not include the winding or stationary cones.

How to Verify Your Spring Size

Before ordering, confirm these four primary specifications:

• Wire size: .2070"

• Inside diameter: 1.75"

• Spring length: 120.00"

• Wind direction: Right Wind (RW)

The Yellow color code corresponds to .2070 wire, but the actual wire diameter should always be measured and verified before ordering.

Important Safety Information

Torsion springs operate under extreme tension and can cause serious injury or property damage if improperly installed, adjusted, or removed. Installation and replacement should be performed by a qualified technician using proper winding bars and established safety procedures.