Raynor Residential Spring Anchor Plate – For 2-1/4" ID Torsion Springs

The Raynor Residential Spring Anchor Plate is designed for compatible Raynor residential garage door torsion systems using 2-1/4" inside-diameter torsion springs.

The anchor plate provides the stationary mounting point for the torsion spring assembly at the center of the torsion shaft and is intended as a replacement for compatible Raynor residential spring-anchor configurations.

Specifications

Designed for Raynor Residential Systems

This anchor plate is intended for compatible Raynor residential torsion-spring assemblies.

Raynor systems can use hardware configurations that differ from common universal torsion components, so using the correct anchor plate is important when repairing or rebuilding the spring assembly.

For 2-1/4" ID Torsion Springs

This residential Raynor anchor plate is specifically designed for systems using 2-1/4" inside-diameter torsion springs.

Do not substitute it solely based on appearance.

Before ordering, verify:

• 2-1/4" spring inside diameter

• Existing anchor plate configuration

• Torsion shaft arrangement

• Mounting-hole locations

• Center-support configuration

• Raynor door hardware compatibility

Function of the Spring Anchor Plate

The spring anchor plate provides the stationary attachment point for the torsion spring assembly.

In a conventional torsion system, the stationary end of the spring is secured at the center support while the opposite end is wound to provide the torque required to counterbalance the garage door.

A damaged, bent, cracked, or incorrect anchor plate can affect proper spring alignment and torsion-system operation.

Replacement Applications

This anchor plate may be appropriate when:

• Replacing a damaged Raynor residential anchor plate

• Rebuilding a torsion spring assembly

• Replacing worn center-support hardware

• Installing replacement 2-1/4" ID torsion springs

• Restoring an original Raynor-style torsion configuration

Important Compatibility Note

Spring anchor plates are not universal.

This part should only be ordered after confirming that your existing Raynor residential torsion system uses the appropriate 2-1/4" ID spring and matching anchor configuration.

Standard universal spring anchor plates may not fit certain Raynor torsion systems.

What's Included

Package includes:

• (1) Raynor Residential Spring Anchor Plate

Torsion springs, bearing, torsion shaft, fasteners, winding cones, stationary cones, cable drums, and other hardware are not included unless specifically stated.

Ready to Order?

If your Raynor residential torsion system uses 2-1/4" ID torsion springs and matches this anchor-plate configuration, this is the appropriate replacement component.

Add it to your cart today to restore the proper center anchor point for your Raynor torsion spring assembly.

Before ordering, compare the existing hardware and confirm:

• 2-1/4" spring ID

• Raynor residential application

• Anchor plate configuration

• Mounting arrangement

Safety Warning

⚠️ Garage door torsion springs operate under extreme stored mechanical energy.

Never loosen, remove, or replace a spring anchor plate while torsion springs are under tension.

Torsion-system service should be performed only by a qualified person using proper tools and procedures. Incorrect removal or installation can cause severe injury, death, or property damage.

SEO Title: Raynor Residential Spring Anchor Plate – 2-1/4" ID Springs

Meta Description: Raynor residential spring anchor plate for compatible garage door torsion systems using 2-1/4" ID torsion springs. Replacement center spring anchor plate.