Quick Close Fixture Pair – Low-Headroom Garage Door Hardware

The Quick Close Fixture Pair is designed to help solve low-headroom clearance problems on compatible sectional garage doors, particularly when installing an automatic garage door opener where standard track and fixture geometry does not provide sufficient overhead clearance.

The fixtures can reduce the required headroom by approximately 1-1/2" to 2-1/2" and provide a low-headroom solution similar in purpose to double-track hardware.

They can be incorporated during the original garage door installation or added to an existing compatible system when additional clearance is needed.

Key Features

• Sold as a pair

• Reduces headroom requirement by approximately 1-1/2" to 2-1/2"

• Designed to help solve low-headroom garage door installations

• Particularly useful when adding a garage door opener

• Serves a similar purpose to traditional double-track low-headroom hardware

• Can be installed during initial door installation

• Can also be added to compatible existing door systems

• Professional-grade garage door hardware

Specifications

Low-Headroom Applications

Standard sectional garage doors require sufficient space above the door opening for the track, rollers, and top section to transition into the horizontal track.

When ceiling height, structural framing, ductwork, beams, or a garage door opener limits the available space, a conventional setup may not provide enough clearance.

Quick Close Fixtures are designed to reduce this headroom requirement, providing approximately 1-1/2" to 2-1/2" of additional clearance depending on the installation.

Alternative to Double-Track Hardware

These fixtures are designed to serve the same general purpose as double-track low-headroom hardware, making them useful where an installer needs additional clearance without using a conventional double-track arrangement.

Common Applications

Suitable for compatible:

• Residential sectional garage doors

• Low-headroom garage installations

• Garage door opener installations

• Doors with limited ceiling clearance

• Retrofit applications

• New garage door installations

• Installations affected by beams, framing, ductwork, or other overhead obstructions

Compatibility

Before ordering, verify the existing:

• Door construction

• Track configuration

• Top-fixture arrangement

• Available headroom

• Roller and track dimensions

• Garage door opener clearance

Low-headroom requirements vary by door and track configuration. Confirm that this fixture is appropriate for the specific door system before installation.

Installation & Safety

Garage door track and fixture geometry directly affect how the top section travels through the radius and closes against the header.

After installation, verify that the door moves freely through its full travel and that the top section closes and seals properly without binding.

Disconnect the automatic opener before servicing garage door hardware. Do not loosen or remove components connected to spring or cable tension unless properly trained and equipped to service garage door systems.

Garage doors and their spring systems can store significant mechanical energy. Professional installation is recommended when modifying track or fixture configurations.