LiftMaster Q042 / K16-50108 Drive Belt — DC CSW, 4L300
The LiftMaster Q042 supplier SKU identifies drive belt K16-50108, listed for the documented DC CSW drive arrangement with a 4L300 belt designation. Match the exact installed drive and belt markings before ordering. A belt for a backup-drive arrangement can differ from the main AC motor belt in the same operator family. This service item does not establish compatibility with every CSW generation or include the pulleys and motor. Belt slip or breakage also calls for inspection of alignment, drive resistance and the connected components.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| DC CSW arrangements specifying K16-50108 | Match the exact installed drive. |
| 4L300 designation | Confirm belt profile and length convention on the actual component. |
| Main AC motor drive | May use a separate belt; do not infer shared fit. |
| Q163 /4L300 | Different belt designation. |
| Other CSW generations | Require their own repair reference. |
Inspect the Pulleys Before Installing a New Belt
Belt wear can reveal a problem elsewhere in the drive. Examine pulley grooves, alignment, shaft movement and mounting security before installing the replacement. A belt that repeatedly slips, frays or walks sideways should not simply be tightened harder. Have the technician identify the underlying cause and confirm that the installed pulley combination matches the manufacturer’s original arrangement.
Record the belt marking while it is still legible and compare it with the model-specific parts list. Older equipment may contain a previously substituted belt, so the old part is useful evidence but not the only selection reference. Follow the documented tension-setting procedure after installation and check the full gate movement under controlled conditions. An operator belt is not a repair for worn hinges or a binding gate.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Supplier SKU | Q042 |
| Manufacturer reference | K16-50108 |
| Belt designation | 4L300 |
| Supplier application | DC CSW drive |
| Separate items | Motor and pulleys |
| Selection basis | Exact drive role, original markings and service drawing |
Before Ordering
- Match Q042 to K16-50108.
- Record the installed4L300 belt markings and drive role.
- Inspect both pulleys, mounting and tension adjustment.
- Confirm the cause of slipping, wear or breakage before replacement.
Package Contents and Separate Requirements
This offer identifies the Q042 / K16-50108 drive belt. A motor, pulley set, mounting plate, tensioning hardware, backup controller and complete operator are not promised as included. Confirm the current package and supplied belt designation. A drawing may show several drive belts and pulleys in one operator; identify each by its exact position rather than assuming one belt order renews every drive connection.
Safety Warnings — Read Before Installation or Service
- WARNING: Moving belts and pulleys can entangle fingers, clothing and tools. Use a qualified gate-systems technician and isolate all applicable power before service.
- Secure the gate against unexpected movement before releasing belt tension or removing drive components. Keep hands clear of pulley pinch points.
- Do not run the operator with guards removed or use excessive tension to compensate for mismatched or damaged parts.
- Restore guarding, then verify gate travel, stopping, reversal and every required protection device before reopening the entrance.
Related Products and Important Differences
- 16-4L290 drive belt — a different belt selection; not a substitute for the 4L300 reference.
- LMRRUL monitored photo eye — a separate safety accessory only where approved by the operator’s exact controls; belt service does not replace protection testing.
Frequently Asked Questions
What belt is identified?
The source specifies 4L300 under K16-50108.
Is it Q163?
No. Q163 is associated with a different belt reference and designation.
Does every CSW use it?
No. Match the exact DC drive and operator generation.
Will a new belt fix damaged pulleys?
No. The pulleys and alignment require separate inspection.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.