LiftMaster PS12D2A Access-Control Power Supply — 12V DC, 2A
The LiftMaster PS12D2A is a 12V DC, 2-amp power supply identified for supported access-control applications. The supplied product record names KPR2000, CAP2D and PPLX, while the KPR2000 manufacturer instructions list PS12D2A as a separately purchased accessory. Match the device, electrical load, connection and installation environment before ordering. This is a power-supply-only offer, not a keypad, reader or controller package, and a 12V label alone does not establish compatibility with every device at an entrance.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| KPR2000 | Manufacturer instructions list PS12D2A as a separate accessory. |
| CAP2D / PPLX | Source-listed applications; check the exact connection and load requirements. |
| 24V systems | Different voltage requirements; not a universal substitute. |
| 12VAC devices | DC output is not interchangeable with an AC supply. |
| Locks and additional accessories | Confirm the approved circuit and total load rather than adding arbitrary devices. |
Select the Supply for the Complete Connected Load
Record the powered device model and the existing supply label before choosing a replacement. Verify output type, polarity, connection style and required current with the equipment instructions. A physically fitting plug does not prove that a supply is electrically correct. Where field wiring is used, cable length and conductor size must suit the approved arrangement so the device receives adequate power.
A device that will not start or operates intermittently can have a wiring fault, loose connection or excessive load rather than a failed supply. Have the installer diagnose the circuit before replacement. Keep reader, controller and electric-lock power requirements distinct unless the exact instructions approve the combined arrangement. The 2-amp rating is a selection limit, not permission to connect every 12V accessory at the property.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Model | PS12D2A |
| Product | Access-control power supply |
| Output voltage | 12V DC |
| Current rating | 2A |
| Source applications | KPR2000 / CAP2D / PPLX; verify configuration |
| Package scope | Power supply only |
Before Ordering
- Identify the KPR2000, CAP2D or PPLX configuration being powered.
- Verify 12V DC output, polarity and the required current.
- Inspect the connection, cable run and connected loads.
- Confirm the supplied leads and installation-location requirements.
Package Contents and Separate Requirements
The offer identifies the PS12D2A power supply only. A keypad, reader, CAP2D controller, cards, programmer, electric lock and field wiring are not promised as included. Confirm the supplied connection hardware against the actual device before purchase. A larger reader kit may include a power supply, but its bundle contents should not be transferred to this separate power-supply SKU.
Safety Warnings — Read Before Installation or Service
- WARNING: Disconnect power before replacing the supply or disturbing access-control wiring. Qualified personnel should assess mains connections and damaged wiring.
- Never connect mains voltage to low-voltage equipment. Confirm DC polarity and the exact device requirements before applying power.
- Do not exceed the approved connected load or assume an indoor supply is suitable for outdoor exposure. Follow the supplied installation instructions.
- Maintain required emergency egress during service and test authorized access and normal system operation after the repair.
Related Products and Important Differences
- KPW250 wireless keypad — a separate access device for supported gate receivers; it is not a replacement power supply or CAP intercom.
- LMRRUL monitored photo eye — a separate safety device where approved by the gate operator; reliable intercom power does not provide entrapment protection.
Frequently Asked Questions
What output does it provide?
The listed output is 12V DC at 2 amps.
Is KPR2000 included?
No. The manufacturer lists this supply as a separate accessory.
Can it replace a 24V supply?
No. Match the device’s specified voltage and output type.
Can it power any 12V lock?
Not automatically. The lock, wiring, load and approved power arrangement must be checked.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.