LiftMaster CAP4EXPND Smart Access Expansion Board — CAPXAP /CAP4AP Service
The LiftMaster CAP4EXPND is the Smart Access Expansion Board documented for the CAPXAPcontroller panel and CAPXAP-CNTLcontrol board. The manufacturer specifies four relays, four supervised inputs and two Wiegand inputs, and also identifies the board as the service kit for CAP4AP. It is not a stand-alone cloud controller or a universal gate expansion board. Match the host system, current configuration and exact installation instructions before ordering;additional ports must be planned within the supported architecture rather than treated as an unrestricted number of doors.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| CAPXAP /CAPXAP-CNTL systems | Use current expansion wiring and board limits. |
| CAP4AP service replacement | Manufacturer identifies this service role. |
| K1D8387gate expansion board | Different platform and function. |
| Standalone access control | Host/control requirements remain separate. |
| Reader and lock circuits | Verify exact interface, power and load requirements. |
Map the Extra Ports to the Complete Access System
List the additional relays, door contacts, request-to-exit devices and Wiegand readers the project needs. Have the installer map these to the current controller and expansion rules. A relay count is not automatically a door count, and supervised inputs do not establish compatibility with every sensor. Check the existing host and supplied board revision before selecting a module.
Plan communication wiring, power, enclosure support and the connected lock circuits under the exact instructions. Do not assume relay contacts supply accessory power orcopy wiring from a gate-operator expansion board. After installation, verify each new input, reader and relay function and the site’s required release behavior. Check the controlled opening’s safety independently;an expansion board does not replace monitored gate protection ormake an unsafe entrance suitable for automatic operation.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Model | CAP4EXPND |
| Product | Smart Access Expansion Board |
| Relays | Four |
| Supervised inputs | Four |
| Wiegand inputs | Two |
| Documented hosts/service | CAPXAP /CAPXAP-CNTL;CAP4AP service kit |
Before Ordering
- Record exactCAPXAP/CAPXAP-CNTL host orCAP4APrepair context.
- Map required four-relay/four-input/two-reader resources.
- Confirm board limits, wiring, power and current revision.
- Plan full access, input-monitoring and release tests.
Package Contents and Separate Requirements
This offer identifies the CAP4EXPNDboard. A controller cabinet, main control board, reader, keypad, lock, power supply, network equipment, field wiring and service subscription are not promised as included. Confirm current mounting and connection pieces in the board package. The module’s service role for CAP4APdoes not make it a complete replacement controller installation with every accessory. Select additional required components according to the actual host and site design.
Safety Warnings — Read Before Installation or Service
- WARNING: Expansion wiring can affect entry and egress. Use qualified access-control personnel and preserve approved emergency release.
- Isolate controller, lock supplies and separately powered circuits before wiring. Confirm contacts versuspowered outputs.
- Do not exceed documented ratings or substitute a gate expansion board. Do not bypass required protection to force an access function.
- Test each reader, input, relay, release function and required controlled-opening protection before normal use.
Related Products and Important Differences
- KPW250 wireless keypad — a separate wireless access product;not automatically a wired reader for this board.
- LMRRUL monitored photo eye — separate gate protection where approved;input supervision here does not establish a gate safety interface.
Frequently Asked Questions
Is it a stand-alone controller?
No. Host and system requirements remain separate.
How many relays are specified?
Four, with four supervised inputs and two Wiegand inputs.
Can it serviceCAP4AP?
The manufacturer identifies that service-kit role.
Is it the same asK1D8387?
No. They belong to different control platforms.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.