LiftMaster 041B0736 Input Board — Documented EL2000 /EL25 Systems

LiftMaster 041B0736 Input Board — Documented EL2000 /EL25 Systems

$109.00
Skip to product information
LiftMaster 041B0736 Input Board — Documented EL2000 /EL25 Systems

LiftMaster 041B0736 Input Board — Documented EL2000 /EL25 Systems

041B0736
$109.00
Shipping calculated at checkout.

The LiftMaster 041B0736 is the input-board service reference identified in EL2000 access-control repair information and offered by the supplier for EL25/EL2000 systems. It is separate from the 041B0735 main board and 041B0737 output board. Match the exact telephone-entry unit, installed board and connector arrangement before ordering. An input fault can originate in field wiring or another connected component, so the entry system should be diagnosed before this board is selected as the repair. It is not a complete controller or a modern CAP-series upgrade.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
EL2000 drawings naming041B0736 Match installed board and revision.
EL25 supplier application Confirm exact unit repair information.
041B0735 main board Separate function and item.
041B0737 output board Different service component.
CAPXL /CAPXM /CAPXS No cross-generation upgrade or fit established.

Identify the Input Fault and Inspect the Connections

Record the entry-unit model and board labels and photograph the connections before removal. Determine which input function is affected and have the installer inspect field wiring and connected devices. A damaged cable or loose connection can resemble a board fault. Do not replace multiple electronics assemblies by guesswork or assume that input and output boards are interchangeable because they share a part-number family.

Preserve the exact wiring and board mounting under the applicable service instructions. Inspect the enclosure for moisture or impact damage so a replacement board is not installed into an unresolved fault. Maintain required entry and egress during service, then verify the repaired input and normal entry functions. Test the controlled gate or door’s required protection separately before returning the site to normal operation.

Specifications and Product Identification

Specification Details
Part number 041B0736
Product Input board
Manufacturer context EL2000
Supplier additional family EL25; verify exact service list
Separate main board 041B0735
Separate output board 041B0737

Before Ordering

  • Record full EL2000 orEL25 model and installed board.
  • Confirm 041B0736 versus main oroutput reference.
  • Inspect field wiring, connectors and enclosure condition.
  • Plan input-function, access and separate safety tests.

Package Contents and Separate Requirements

This offer identifies the 041B0736 input board. The main board, output board, display, keypad, interconnect cables, enclosure and complete telephone-entry system are not promised as included. Confirm the current board and any supplied mounting pieces with the service package. The EL2000 drawing identifies these electronic assemblies separately, so an input-board order should not be treated as a complete entry-system rebuild.

Safety Warnings — Read Before Installation or Service

  • WARNING: Access-control repairs must preserve required emergency egress and safe door or gate operation. Use a qualified access-control installer.
  • Disconnect the applicable power sources before opening the unit or moving wiring. Account for separate lock supplies as well as the intercom supply.
  • Do not improvise relay wiring or exceed the documented electrical limits of the board and connected equipment. Never defeat required release or safety functions.
  • Test each controlled opening and its authorization, release and required safety behavior before restoring normal access.

Related Products and Important Differences

  • KPW250 wireless keypad — a separate access product requiring its own receiver compatibility; not part of this intercom repair.
  • LMRRUL monitored photo eye — separate gate protection where approved; intercom service does not replace safety testing.

Frequently Asked Questions

Is this the main board?

No.041B0735 is separately identified.

Is it the output board?

No.041B0737 is a different item.

Does it fit everyEL25 revision?

Confirm the exact installed unit and parts list.

Will it repair damaged field wiring?

No. Wiring requires separate diagnosis and repair.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products