LiftMaster 041A4202-6B-MC Legacy Wall-Control Panel — 041A4202-6B, Green Learn Button
The LiftMaster 041A4202-6B-MC supplier SKU maps to manufacturer 041A4202-6B, the wall-control panel currently identified for selected 1993–1997 openers with a green learn button. Match the opener’s actual generation and repair reference before ordering. The supplier’s Security+ wording should not be interpreted as compatibility with all later Security+ or Security+ 2.0 equipment. This is a wired wall control, separate from a radio remote or receiver. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Listed1993–1997 green-button openers | Verify the exact owner’s manual and service reference. |
| Yellow-button Security+ 2.0 | Different generation; no automatic wall-control compatibility. |
| Later red/orange or purple-button systems | Do not infer fit from broad Security+ terminology. |
| Radio transmitters | Separate products; wall-control compatibility is not determined by remote frequency alone. |
Identify the Assembly and Plan the Repair
Record the opener model, manufacture date and learn-button color together. A cover or logic board may have been replaced during prior service, so inspect the actual installed controls rather than relying on the age of the door. The manufacturer’s narrow current application note should guide selection where abbreviated supplier wording is broader.
Diagnose the wall-control circuit and wiring before replacing the panel. A damaged cable or opener control fault can prevent response even if the panel is functioning. Follow the exact low-voltage connection instructions and preserve polarity where required. Do not connect mains voltage or assume a newer control can replace this panel because it uses two wires.
An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.
Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | 041A4202-6B-MC |
| Manufacturer reference | 041A4202-6B |
| Supplier SKU | 041A4202-6B-MC |
| Manufacturer application window | 1993–1997 only |
| Learn-button identifier | Green; confirm exact opener |
Before Ordering
- Confirm manufacturer 041A4202-6B mapping.
- Identify the full opener and 1993–1997 applicability.
- Verify the green learn button and actual control revision.
- Inspect field wiring and obtain exact installation instructions.
Package Contents and Separate Requirements
This offer identifies the wall-control panel. Opener, receiver, remotes, field wire and complete door system are separate unless expressly included. Confirm the supplied mounting pieces and instructions. The supplier -MC suffix is an ordering identifier and does not establish a newer radio protocol or a universal control conversion.
Safety Warnings — Read Before Installation or Service
- WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
- Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
- Connect only to the documented opener control circuit. Do not apply mains voltage or bypass reversing sensors to make a mismatched control operate.
- Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.
Related Products and Important Differences
- 880LMW Smart Control Panel — a different wall-console option for its own approved Security+ 2.0 applications; not proof of interchangeability with this panel.
- 885LM wireless control panel — a separate wireless control method for supported openers; verify model compatibility independently.
Frequently Asked Questions
What is the manufacturer part number?
The supplier record maps this offer to 041A4202-6B.
Is it for every Security+ opener?
No. The current manufacturer page restricts the stated application to 1993–1997 green-button units.
Is it a wireless remote?
No. It is a wall-control service panel.
Can two-wire appearance prove fit?
No. The control protocol and exact opener reference must match.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.