Garage Door Extension Spring - 8' High Door ( 27-48)

SSC 210 lb Garage Door Extension Spring – 27-48 Series – White – 8′ Door – Clips Included

$48.70
Skip to product information
Garage Door Extension Spring - 8' High Door ( 27-48)

SSC 210 lb Garage Door Extension Spring – 27-48 Series – White – 8′ Door – Clips Included

8121
$48.70
Shipping calculated at checkout.

🇺🇸 Made in USA

This SSC garage door extension spring is designed for compatible 8-foot-high sectional garage doors requiring a 210 lb spring rating. It belongs to the 27-48 Series and features white identification markings and clipped ends for attachment to compatible extension-spring hardware.

Manufactured by Service Spring Corporation from black-coated, oil-tempered spring wire, this spring is rated for a minimum of 10,000 operating cycles. Correctly matched springs help counterbalance the door for smooth operation and reduce unnecessary strain on the garage door opener.

Specifications

Specification Details
Manufacturer Service Spring Corporation (SSC)
Spring type Extension spring
Spring series 27-48
Door height 8 feet
Spring rating 210 lb
Color code White
Relaxed spring length Approximately 27 inches
Specified stretch 48 inches beyond relaxed length
Extended spring length Approximately 75 inches
End configuration Clipped ends
Clips included Yes
Material Oil-tempered spring wire
Finish Black coated
Cycle rating Minimum 10,000 cycles
Country of manufacture USA

Understanding the 27-48 Measurement

The 27-48 designation refers to approximately 27 inches of relaxed spring length with 48 inches of additional stretch, resulting in approximately 75 inches when extended.

48 inches is the stretch amount—not the total extended length. Confirm the spring series, rating, and attachment style when selecting a replacement.

Common Uses

  • Replacing worn or broken extension springs on compatible 8-foot-high sectional garage doors.

  • Restoring proper counterbalance on systems requiring 210 lb-rated springs.

  • Servicing extension-spring installations with clipped-end attachment hardware.

Compatibility and Spring Selection

This spring is intended for compatible extension-spring counterbalance systems, typically installed alongside the horizontal tracks. It does not replace a torsion spring mounted on a shaft above the door.

Verify the following before ordering:

  • 8-foot door height

  • 27-48 spring series

  • 210 lb required spring rating

  • Clipped-end attachment configuration

  • Compatible pulleys, cables, and mounting hardware

Do not select a spring by color alone. White identification markings repeat across different spring ratings.

In a conventional two-spring residential system, a matched pair of 210 lb-rated springs is used for an approximately 210 lb door—not a 420 lb door. Have a garage door professional confirm the actual door weight and counterbalance requirements, especially if the door has been modified.

Installation Notes

Replacing both extension springs together is recommended when they are the same age to help maintain balanced lifting and consistent performance.

Inspect the pulleys, lift cables, safety cables, and attachment points during replacement. Replace worn or damaged hardware before returning the door to service.

Safety cables must run through each extension spring to help contain it if it breaks. The included end clips attach the spring to compatible hardware; they do not replace safety cables.

Safety

Garage door springs operate under high tension and can cause serious injury. Professional installation is recommended. Never disconnect or adjust a spring, cable, or attachment while under tension.

Do not operate a door with a broken spring or use the opener to compensate for an unbalanced door.

Order the Correct Replacement

**Choose this SSC 210 lb white extension

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.