Garage Door Extension Spring - 8' High Door ( 27-48)

SSC 8' Garage Door Extension Spring – 120 lb – 27-48 Series – Green – Double Loop

$25.79
Skip to product information
Garage Door Extension Spring - 8' High Door ( 27-48)

SSC 8' Garage Door Extension Spring – 120 lb – 27-48 Series – Green – Double Loop

8112
$25.79
Shipping calculated at checkout.

🇺🇸 Made in USA

This SSC garage door extension spring is designed for compatible sectional garage doors approximately 8 feet highrequiring a 120 lb spring rating.

Manufactured by Service Spring Corporation (SSC), this spring belongs to the 27-48 Series and features durable double-loop ends for compatible extension-spring systems.

The spring is black coated, uses the Green identification color for the 120 lb rating, and is rated for an industry-standard minimum lifecycle of 10,000 operating cycles.

Specifications

Specification Details
Manufacturer Service Spring Corporation (SSC)
Spring Type Extension Spring
Door Height 8'
Spring Series 27-48 Series
Pull Rating 120 lb
Color Code Green
End Style Double Loop
Clips Included No
Finish Black Coated
Minimum Cycle Rating 10,000 Cycles
Made In USA

27-48 Series for 8' High Doors

This spring is part of SSC's 27-48 Series, designed for compatible 8-foot-high sectional garage doors.

The 27-48 designation identifies the spring series and should not be treated as a literal physical measurement.

Correct replacement should be based on the complete spring specification, including:

  • Door height

  • Spring series

  • Required pull rating

  • End configuration

  • Existing spring setup

  • Door counterbalance requirements

120 lb Pull Rating

This spring provides a 120 lb pull rating.

Correct spring strength is essential for proper garage door balance. Installing a spring with too little or too much lifting force can result in:

  • Heavy manual operation

  • A door that rises unexpectedly

  • Uneven lifting

  • Incorrect cable tension

  • Excessive opener strain

  • Premature pulley and hardware wear

Always verify the required spring rating before ordering.

Green Color Code

The Green identification color corresponds to the 120 lb extension-spring rating.

Extension-spring color codes repeat at higher weight ranges, so color alone should never determine the correct replacement.

Confirm:

  • 8' door application

  • 27-48 Series

  • 120 lb pull rating

  • Green identification

  • Double-loop ends

Double-Loop Ends

This version features double-loop ends for attachment to compatible extension-spring hardware.

Clips are not included with the standard 8112 configuration.

Compare your existing spring and attachment hardware before ordering to make sure the replacement end style matches the original system.

How Extension Springs Work

Extension springs are normally installed alongside the horizontal tracks on both sides of a sectional garage door.

As the door closes, the springs stretch and store mechanical energy. As the door opens, that stored energy helps lift and counterbalance the weight of the door.

A properly matched extension-spring system helps provide:

  • Smooth door travel

  • Proper counterbalance

  • Reduced garage door opener strain

  • Correct cable tension

  • Easier manual operation

Compatibility & Fitment

Extension springs are not universal.

This spring should be selected when your system specifically requires:

  • 8' high garage door

  • 27-48 Series

  • 120 lb pull rating

  • Green color code

  • Double-loop ends

Also inspect the existing:

  • Lift cables

  • Pulleys

  • Safety containment cables

  • Spring attachment points

  • Track hardware

  • Rear supports

  • Fasteners

Replace worn or damaged components before returning the door to service.

Replace Extension Springs in Pairs

For garage doors using two extension springs, replacing both springs as a matching pair is generally recommended.

Both springs normally experience approximately the same number of operating cycles. If one spring fails or weakens, the opposite spring may already be fatigued.

Using one new spring with one worn spring can cause:

  • Uneven lifting force

  • Unequal cable tension

  • Crooked door movement

  • Poor door balance

  • Increased hardware wear

Safety Cables Strongly Recommended

Extension-spring systems should use properly installed safety containment cables running through each spring.

If an extension spring breaks, the safety cable helps contain the spring and reduces the risk of it becoming a dangerous projectile.

Inspect existing safety cables whenever replacing extension springs.

Ready to Order?

If your existing system requires an 8' door, SSC 27-48 Series extension spring, 120 lb rating, Green identification, and double-loop ends, this spring is ready for your repair.

Add it to your cart today and restore proper garage door counterbalance with the correct SSC-made extension spring.

Before ordering, double-check:

  • 8' door height

  • 27-48 Series

  • 120 lb pull rating

  • Green color code

  • Double-loop ends

Safety Warning

⚠️ Garage door extension springs operate under substantial tension and can cause severe injury, death, or property damage if improperly handled.

Never remove an extension spring, pulley, lift cable, or attachment point while the spring is stretched.

Secure the garage door and fully release spring tension before servicing the extension-spring system.

Installation should be performed by a qualified person familiar with garage door extension springs, safety containment cables, and proper installation procedures.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.