EMX MVP D-TEK Multi-Voltage Vehicle Loop Detector – 12–60 VDC / 12–240 VAC

Use one versatile detector across a wide range of gate and commercial door installations with the EMX MVP D-TEK. It automatically tunes to a connected inductive loop and accepts multiple common AC and DC power sources.

Features and Specifications:

• DC input power: 12–60 VDC

• AC input power: 12–240 VAC, 48–62 Hz

• Loop inductance range: 20–2,000 µH with Q factor of 5 or higher

• Sensitivity settings: 10

• Operating modes: Presence and pulse

• Failure modes: Fail-safe or fail-secure

• Outputs: Two relays

• Relay rating: 1 A at 30 VDC

• Connector: 11-pin male

• Housing: Anodized aluminum

• Operating temperature: -40°F to 180°F

• Dimensions: Approximately 3.25" × 2.56" × 3.65"

Additional functions include automatic environmental tracking, loop diagnostics, frequency counting, automatic sensitivity boost, surge protection, and an internal loop isolation transformer.

The detector requires a compatible 11-pin socket base or wiring harness and a correctly installed inductive loop. These accessories are not included unless specifically stated in the selected package.

Installation and wiring should be completed by a qualified access-control technician. Disconnect power, follow the operator manufacturer’s instructions, and test all detection and safety functions before returning the system to service.

EMX MVP D-TEK Multi-Voltage Vehicle Loop Detector
Universal-voltage inductive-loop detector with two relays, diagnostics, and fail-safe or fail-secure operation.