Genie 19988A.S 70 MFD Garage Door Opener Motor Start Capacitor – 220 VAC
The Genie 19988A.S is a replacement motor start capacitor designed for many compatible Genie garage door openers.
The capacitor provides the temporary electrical boost needed to help the AC opener motor begin turning. When a start capacitor becomes weak or fails, the opener motor may hum, hesitate, struggle to start, or fail to move the garage door.
### Product Features
- Genuine Genie replacement capacitor
- Part number 19988A / 19988A.S
- Replaces X-19988-A applications
- 70 MFD / µF capacitance
- 220 VAC rating
- Motor starting capacitor
- Connects to the existing opener capacitor wiring
- No programming required
- Replacement for many older Genie opener models
### Specifications
- Manufacturer: Genie
- Part Number: 19988A / 19988A.S
- Product Type: Motor Start Capacitor
- Capacitance: 70 MFD / µF
- Voltage Rating: 220 VAC
- Frequency: 50/60 Hz compatible applications
- Approximate Size: 3-5/16" × 1-3/8"
- Application: Residential Garage Door Opener Motor
- Quantity: 1 Capacitor
### What Is It Used For?
The start capacitor provides an extra electrical boost when the garage door opener motor first starts.
During startup:
Power → Start Capacitor → Motor → Drive System → Garage Door
Once the motor begins operating, the opener continues through its normal operating cycle.
### Common Signs of a Failed Capacitor
A weak or failed capacitor may cause:
- Motor hums but does not start
- Opener struggles to begin moving
- Intermittent opener operation
- Motor starts slowly
- Door will not move even though power is reaching the opener
- Capacitor appears swollen, leaking, or damaged
- Burning or electrical odor near the opener powerhead
These symptoms can also be caused by a failed motor, control board, stripped drive components, or an improperly balanced garage door.
Proper diagnosis is recommended before replacing electrical components.
### Compatible Genie Openers
Genie lists the 19988A.S for many compatible models including:
- 1060
- 1560
- 2560
- 3560
- 3860
- H4000
- H6000
- 2060L
- 3060L
- CM7600
- CM8600
- PRO95
- IS525
- IS550
- IS850
- IS900
- IS920
- IMS1000
- ISL950
- ISL980
- G4050
- G5000
- G5050
- G5500
- G5700
- G8000
- GX9000
- GXL9500
- GXL9550
- GXL9900
- GXL1000
- PMX-series compatible models
- AMX-series compatible models
- Additional Genie models originally equipped with the 19988A capacitor
Always verify the opener model and original capacitor before ordering. :contentReference[oaicite:1]{index=1}
### Important Compatibility Note
Do not select a capacitor based only on physical appearance.
Before ordering, verify:
- Original capacitor part number
- MFD / µF rating
- Voltage rating
- Garage door opener model
- Terminal configuration
For example, some Genie models use the different 18004B.S 50–60 MFD capacitor instead.
### 19988A vs. 19988A.S
The older capacitor may be marked:
19988A
X-19988-A
Genie currently identifies the replacement as:
19988A.S
Genie confirms the 19988A.S as the correct replacement for compatible X-19988-A applications. :contentReference[oaicite:2]{index=2}
### Package Contents
Includes:
- 1 – Genie 19988A.S 70 MFD Motor Start Capacitor
Garage door opener, motor, wiring, mounting hardware, and other components are not included unless specifically stated.
### Important Electrical Safety Warning
Capacitors can retain a potentially dangerous electrical charge even after the garage door opener has been unplugged.
Disconnect opener power before servicing internal components.
The capacitor must be safely discharged before removal or replacement.
If you are not experienced working with electrical components, installation should be performed by a qualified garage door or electrical service technician.
After replacement, verify that the garage door is properly balanced and that the opener operates normally through several complete cycles.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection