Garage Door Adjustable Spreader Arm for 1" Torsion Shaft – Dual Spring Center Support Bracket

Product Description

This adjustable spreader arm is designed to support a standard 1" garage door torsion shaft and provide an adjustable center mounting point for dual torsion spring assemblies. The slotted steel bracket allows the spring anchor locations to be positioned as needed for the specific spring and shaft configuration.

The integrated bearing supports help maintain shaft alignment while the adjustable spring anchor brackets secure compatible stationary spring cones. It is commonly used on commercial, industrial, and heavy-duty sectional garage doors requiring two torsion springs mounted near the center of the shaft.

Manufactured in the USA by Service Spring Corporation (SSC). The current product is listed as SSC part 204C.

Size / Specifications

• Product type: Adjustable torsion spring spreader arm
• Shaft compatibility: Standard 1" torsion shaft
• Application: Dual torsion spring assemblies
• Adjustment type: Slotted center mounting positions
• Construction: Heavy-duty galvanized steel
• Bearing supports: Two integrated shaft-bearing locations
• Included hardware: Two adjustable spring anchor brackets
• Manufacturer part number: 204C
• Manufacturer: Service Spring Corporation (SSC)
• Country of manufacture: Made in the USA
• Quantity: One adjustable spreader-arm assembly

Common Uses

• Supporting two torsion springs at the center of the shaft
• Adjusting spacing between stationary spring cones
• Residential and commercial sectional garage doors
• Heavy-duty overhead door torsion systems
• Replacement of damaged or improperly sized center-support hardware
• Custom dual-spring torsion assemblies

Compatibility & Fitment

This spreader arm is intended for garage door torsion systems using a 1" shaft and compatible stationary spring cones.

The slotted mounting area permits the spring anchor brackets to be repositioned for different spring spacing requirements. Confirm the shaft diameter, spring arrangement, stationary-cone mounting pattern, and available installation space before ordering.

This model should not be confused with the separate spreader arm designed for a 1-1/4" shaft, which is also listed on the website.

Important Matching Notes

• Designed for standard 1" torsion shafts.
• Intended primarily for dual torsion spring installations.
• Verify the shaft size before ordering.
• Confirm that the stationary spring cones match the included anchor brackets.
• The torsion shaft must pass freely through both bearing locations.
• The shaft, bearings, springs, and mounting surface must remain properly aligned.
• Do not use damaged, bent, cracked, or heavily corroded spring-support hardware.

Installation Notes

Secure the spreader arm firmly to a structurally sound header or supporting surface using fasteners appropriate for the door system and building construction.

Position the adjustable anchor brackets to match the stationary ends of the torsion springs. Both springs and shaft bearings must remain properly aligned before the mounting hardware is fully tightened.

After installation, confirm that the torsion shaft rotates freely without binding and that all spring-anchor fasteners are properly secured.

Professional installation is strongly recommended.

Safety Warning

Garage door torsion springs are under extreme tension and can cause severe injury or death if handled improperly.

Do not loosen stationary cones, winding cones, spring-anchor brackets, bearings, or related torsion hardware while the springs are under tension. Installation and adjustment should be performed only by a trained garage door professional using proper tools and safety procedures.

SEO Title: Adjustable Spreader Arm for 1" Garage Door Torsion Shaft | SSC 204C

Meta Description: Adjustable SSC spreader arm for 1" garage door torsion shafts and dual-spring center support assemblies. Heavy-duty steel construction with bearings and adjustable anchor brackets.

Product Description

This adjustable spreader arm is designed to support a standard 1" garage door torsion shaft and provide an adjustable center mounting point for dual torsion spring assemblies. The slotted steel bracket allows the spring anchor locations to be positioned as needed for the specific spring and shaft configuration.

The integrated bearing supports help maintain shaft alignment while the adjustable spring anchor brackets secure compatible stationary spring cones. It is commonly used on commercial, industrial, and heavy-duty sectional garage doors requiring two torsion springs mounted near the center of the shaft.

Manufactured in the USA by Service Spring Corporation (SSC). The current product is listed as SSC part 204C.

Size / Specifications

• Product type: Adjustable torsion spring spreader arm
• Shaft compatibility: Standard 1" torsion shaft
• Application: Dual torsion spring assemblies
• Adjustment type: Slotted center mounting positions
• Construction: Heavy-duty galvanized steel
• Bearing supports: Two integrated shaft-bearing locations
• Included hardware: Two adjustable spring anchor brackets
• Manufacturer part number: 204C
• Manufacturer: Service Spring Corporation (SSC)
• Country of manufacture: Made in the USA
• Quantity: One adjustable spreader-arm assembly

Common Uses

• Supporting two torsion springs at the center of the shaft
• Adjusting spacing between stationary spring cones
• Residential and commercial sectional garage doors
• Heavy-duty overhead door torsion systems
• Replacement of damaged or improperly sized center-support hardware
• Custom dual-spring torsion assemblies

Compatibility & Fitment

This spreader arm is intended for garage door torsion systems using a 1" shaft and compatible stationary spring cones.

The slotted mounting area permits the spring anchor brackets to be repositioned for different spring spacing requirements. Confirm the shaft diameter, spring arrangement, stationary-cone mounting pattern, and available installation space before ordering.

This model should not be confused with the separate spreader arm designed for a 1-1/4" shaft, which is also listed on the website.

Important Matching Notes

• Designed for standard 1" torsion shafts.
• Intended primarily for dual torsion spring installations.
• Verify the shaft size before ordering.
• Confirm that the stationary spring cones match the included anchor brackets.
• The torsion shaft must pass freely through both bearing locations.
• The shaft, bearings, springs, and mounting surface must remain properly aligned.
• Do not use damaged, bent, cracked, or heavily corroded spring-support hardware.

Installation Notes

Secure the spreader arm firmly to a structurally sound header or supporting surface using fasteners appropriate for the door system and building construction.

Position the adjustable anchor brackets to match the stationary ends of the torsion springs. Both springs and shaft bearings must remain properly aligned before the mounting hardware is fully tightened.

After installation, confirm that the torsion shaft rotates freely without binding and that all spring-anchor fasteners are properly secured.

Professional installation is strongly recommended.

Safety Warning

Garage door torsion springs are under extreme tension and can cause severe injury or death if handled improperly.

Do not loosen stationary cones, winding cones, spring-anchor brackets, bearings, or related torsion hardware while the springs are under tension. Installation and adjustment should be performed only by a trained garage door professional using proper tools and safety procedures.

 Adjustable Spreader Arm for 1" Garage Door Torsion Shaft | SSC 204C

 Adjustable SSC spreader arm for 1" garage door torsion shafts and dual-spring center support assemblies. Heavy-duty steel construction with bearings and adjustable anchor brackets.