7-5/8" Torsion Spring Stationary Cone – Right-Hand Wound, OHD Style

This OHD-style stationary cone is designed for compatible right-hand-wound torsion springs with a 7-5/8-inch inside diameter. It secures the stationary end of the spring to the center bearing plate or spring anchor bracket.

Specifications

• Spring inside diameter: 7-5/8"

• Spring wind: Right hand

• Cone type: Stationary cone

• Style: OHD

• Maximum compatible wire size: .500"

• Quantity: One stationary cone

Compatibility

Use only with a compatible 7-5/8-inch-ID, right-hand-wound torsion spring using the appropriate OHD-style fittings.

Verify the spring’s inside diameter, wind direction, wire size, torsion-shaft diameter and existing hardware configuration before ordering.

Pair this component with the corresponding 7-5/8" Torsion Spring Winding Cone – Right-Hand Wound, OHD Style when replacing both cones on the same spring.

For installations requiring spring filler, see the available 7-5/8" PVC Torsion Spring Fillers.

Installation and Safety

This component is part of a high-tension commercial or industrial door counterbalance system. Installation should be handled by a trained garage-door professional.

The torsion spring must be completely and safely unwound before the stationary cone or spring-anchor hardware is removed. Inspect the shaft, bearings, anchor bracket and fasteners before returning the door to service.