6" Garage Door Torsion Spring Stationary Cone – Left-Hand-Wound Spring

Replace the stationary cone on a compatible 6-inch left-hand-wound torsion spring with this heavy-duty SSC component. The cone anchors the fixed end of the spring to the spring anchor or center bearing bracket while the winding cone at the opposite end controls spring tension.

Specifications:

• Spring inside diameter: 6"

• Cone type: Stationary cone

• Spring wind: Left-hand wound

• Maximum spring wire size: .4375"

• Quantity: One stationary cone

• Manufacturer: Service Spring Corporation / SSC

• Product number: 171

• Country of manufacture: Made in the USA 🇺🇸

This stationary cone is intended for a left-hand-wound spring. Spring wind describes the direction in which the wire is coiled and should be verified from the existing spring and cone markings rather than assumed from the spring’s position on the door.

The package contains one stationary cone only. It does not include a winding cone, torsion spring, shaft, center bearing, anchor bracket, fasteners, or installation tools.

Before ordering, confirm the spring’s 6-inch inside diameter, wire size, wind direction, cone bore, bolt pattern, and complete spring-system configuration. Large commercial spring components that appear similar are not necessarily interchangeable.

A 6-inch torsion spring can store an extreme amount of energy. The door must be properly secured and all spring tension safely removed before service begins. Installation should be performed only by a qualified commercial garage door technician.

Order SSC 171 when the application requires one stationary cone for a compatible 6-inch left-hand-wound torsion spring with wire no larger than .4375 inch.