5-7/8" OHD-Style Torsion Spring Stationary Cone – Left-Hand-Wound Spring

Repair a compatible OHD-style torsion-spring assembly with this SSC stationary cone for a 5-7/8-inch left-hand-wound spring. The cone secures the fixed end of the spring at the spring anchor bracket while the winding cone at the opposite end is used to apply spring tension.

Specifications:

• Spring inside diameter: 5-7/8"

• Cone type: Stationary cone

• Spring wind: Left-hand wound

• Style/application: OHD-style torsion-spring system

• Maximum spring wire size: .453"

• Quantity: One stationary cone

• Manufacturer: Service Spring Corporation / SSC

• Product number: 1583

• Country of manufacture: Made in the USA 🇺🇸

This component is specifically intended for a left-hand-wound spring. Wind direction refers to the direction of the spring coils and should be confirmed from the existing spring and cone markings before ordering.

Only one stationary cone is included. This product does not include a winding cone, torsion spring, shaft, bearing, spring anchor bracket, fasteners, or winding tools.

Verify the 5-7/8-inch spring inside diameter, maximum wire size, wind direction, bore, mounting pattern, and OHD-style configuration. Do not substitute this cone for the right-wound version or for a cone intended for a different spring diameter.

Large commercial torsion springs store tremendous mechanical energy. All spring tension must be safely removed before the cone is serviced. Installation should be performed only by a qualified commercial garage door technician.

Order SSC 1583 when the approved application calls for one OHD-style stationary cone for a 5-7/8-inch left-hand-wound torsion spring with wire no larger than .453 inch.