5-1/4" Garage Door Torsion Spring Universal Stationary Cone

Complete or repair a compatible large-diameter torsion-spring assembly with this SSC universal stationary cone. It is designed for a torsion spring with a 5-1/4-inch inside diameter and holds the stationary end of the spring at the spring anchor or center bearing bracket.

Specifications:

• Spring inside diameter: 5-1/4"

• Cone type: Stationary cone

• Configuration: Universal

• Maximum spring wire size: .4375"

• Quantity: One stationary cone

• Manufacturer: Service Spring Corporation / SSC

• Product number: 168U

• Country of manufacture: Made in the USA 🇺🇸

Because this is a universal stationary cone, it is used at the fixed end of the spring rather than for applying spring tension. The package does not include a winding cone, torsion spring, shaft, center bracket, bearing, mounting hardware, or winding tools.

Confirm the spring’s actual inside diameter and wire size before ordering. Also compare the cone’s bore, bolt pattern, overall dimensions, and intended anchor-bracket arrangement with the original assembly. Do not select a replacement using the spring diameter alone.

Torsion-spring systems remain hazardous even when the door is closed. Spring tension must be completely and safely released before the cone or spring is removed. Installation should be completed by a qualified commercial garage door technician with the correct tools and spring-handling experience.

Order SSC 168U when your approved spring assembly requires one universal stationary cone for a 5-1/4-inch ID torsion spring with wire no larger than .4375 inch.