5-1/2" Raynor-Style Torsion Spring Stationary Cone – Right-Hand-Wound Spring

Use this SSC stationary cone when assembling or repairing a compatible 5-1/2-inch Raynor-style right-hand-wound torsion spring. The stationary cone supports the fixed end of the spring at the spring anchor bracket, helping maintain the correct position of the spring as torque is applied and released.

Specifications:

• Spring inside diameter: 5-1/2"

• Cone type: Stationary cone

• Spring wind: Right-hand wound

• Style/application: Raynor-style torsion-spring system

• Maximum spring wire size: .4375"

• Quantity: One stationary cone

• Manufacturer: Service Spring Corporation / SSC

• Product number: 1516

• Country of manufacture: Made in the USA 🇺🇸

This cone is made for a right-hand-wound spring. Do not determine spring wind from the cone’s apparent mounting position alone. Verify the direction of the spring coils and compare the markings and dimensions of the original cone before ordering.

Only the stationary cone is included. The torsion spring, winding cone, shaft, bearing, center or spring anchor bracket, fasteners, and winding tools are sold separately.

Correct fit depends on the spring’s inside diameter, wire size, wind direction, bore, bolt pattern, and complete door configuration. A cone that does not match the spring can loosen, fracture, or prevent the assembly from operating safely.

Commercial torsion-spring components should be installed by a qualified garage door technician. The door must be secured and all spring tension safely removed before servicing the assembly.

Order SSC 1516 when your application requires one 5-1/2-inch Raynor-style stationary cone for a right-hand-wound torsion spring with wire no larger than .4375 inch.