5-1/2" Raynor-Style Torsion Spring Stationary Cone – Left-Hand-Wound Spring

Replace the stationary cone on a compatible 5-1/2-inch Raynor-style left-hand-wound torsion spring with this SSC component. The cone anchors the fixed end of the spring to the spring anchor bracket while the corresponding winding cone is used to apply spring torque.

Specifications:

• Spring inside diameter: 5-1/2"

• Cone type: Stationary cone

• Spring wind: Left-hand wound

• Style/application: Raynor-style torsion-spring system

• Maximum spring wire size: .4375"

• Quantity: One stationary cone

• Manufacturer: Service Spring Corporation / SSC

• Product number: 1517

Compatibility and Related Parts:

• Matching left-wound winding cone: SSC 1513

• Opposite-wind stationary cone: SSC 1516

• Right-wound winding cone: SSC 1512

• Designed for compatible 5-1/2-inch Raynor-style torsion springs

For a left-hand-wound spring, SSC 1517 is the stationary cone and SSC 1513 is the corresponding winding cone. SSC 1516 and SSC 1512 are the right-hand-wound counterparts and should not be substituted.

This listing includes one stationary cone only. The winding cone, torsion spring, shaft, bearing, spring anchor bracket, fasteners, and winding tools are not included.

Verify the spring’s 5-1/2-inch inside diameter, left-hand wind, wire size, Raynor-style configuration, cone bore, and mounting pattern. The spring wire must not exceed .4375 inch.

Large commercial torsion springs store substantial mechanical energy. All spring tension must be safely removed before the cone is serviced. Installation should be performed only by a qualified garage door technician.

Order SSC 1517 when the application requires one stationary cone for a compatible 5-1/2-inch Raynor-style left-hand-wound torsion spring.