3-3/4" Garage Door Torsion Spring Stationary Cone – Universal

Replace a worn or damaged stationary cone on a compatible 3-3/4-inch inside-diameter torsion spring with this universal stationary cone. The stationary cone secures the fixed end of the spring to the center bearing or spring anchor bracket, allowing the spring to store and release torque correctly during door operation.

Specifications:

• Spring inside diameter: 3-3/4"

• Cone type: Stationary cone

• Configuration: Universal

• Quantity: One stationary cone

• Manufacturer: Service Spring Corporation / SSC

• Product number: 195190

• Country of manufacture: Made in the USA 🇺🇸

This is a stationary cone only. It is not a winding cone and does not include a torsion spring, winding cone, center bracket, bearing, shaft, fasteners, or installation tools.

Compatibility cannot be determined by spring diameter alone. Before ordering, verify the spring’s measured inside diameter, wire size, shaft configuration, center-bracket arrangement, and existing cone dimensions. Compare the new cone with the original component whenever possible.

Installing or replacing a torsion-spring cone requires removing all tension from the spring and may require cutting, reforming, or replacing the spring assembly. Torsion springs store enough energy to cause severe injury. Installation should be performed only by a qualified garage door technician using correctly sized winding bars and proper spring-handling equipment.

Order SSC 195190 when the application requires one universal stationary cone for a compatible 3-3/4-inch torsion spring.