{"product_id":"liftmaster-k85-fw-75","title":"LiftMaster K85-FW-75 Flat Washer — 3\/4-Inch Designation","description":"\u003cp\u003e\u003cstrong\u003eThe LiftMaster K85-FW-75 is the flat-washer service reference listed with a 3\/4-inch designation. Select it at the exact equipment callout rather than assume that the short nominal size provides every washer dimension. Confirm the required opening, outside diameter, thickness and material specification from the approved service arrangement before substituting any similar hardware. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility — Models, Versions and Exclusions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel or selection point\u003c\/th\u003e\n\u003cth\u003eCompatibility requirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eExact washer callout\u003c\/td\u003e\n\u003ctd\u003eMatch K85-FW-75 in the applicable equipment drawing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal size\u003c\/td\u003e\n\u003ctd\u003eConfirm the actual fit; do not infer every dimension.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat versus lock washer\u003c\/td\u003e\n\u003ctd\u003eDifferent hardware functions must remain distinct.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther attachments\u003c\/td\u003e\n\u003ctd\u003eNo universal washer substitution is established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIdentify the Assembly and Plan the Repair\u003c\/h2\u003e\u003cp\u003eA washer is part of the documented attachment stack, not simply a loose spacer chosen to fill an available gap. Inspect the bolt or shaft, mating faces and surrounding retention components before selecting the replacement. Damage or wear in adjoining parts may remain even after a missing washer is replaced.\u003c\/p\u003e\u003cp\u003eObtain any unstated dimensions and the approved fitting arrangement before ordering generic substitutes. Do not change washer thickness to compensate for a worn bearing, incorrect shaft position or damaged support. Confirm current supplied quantity separately from an illustrated use quantity, restore the intended attachment stack and complete the functional checks appropriate to the serviced assembly.\u003c\/p\u003e\u003cp\u003eCompare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.\u003c\/p\u003e\u003ch2\u003eSpecifications and Product Identification\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrdering reference\u003c\/td\u003e\n\u003ctd\u003eK85-FW-75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eFlat washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished size designation\u003c\/td\u003e\n\u003ctd\u003e3\/4 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrdering reference\u003c\/td\u003e\n\u003ctd\u003eK85-FW-75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnstated dimensions\u003c\/td\u003e\n\u003ctd\u003eVerify outside diameter, thickness and complete fit requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRecord the complete equipment model, serial information and installed service reference.\u003c\/li\u003e\n\u003cli\u003eMatch K85-FW-75 in the applicable equipment drawing.\u003c\/li\u003e\n\u003cli\u003eConfirm the actual fit; do not infer every dimension.\u003c\/li\u003e\n\u003cli\u003eDifferent hardware functions must remain distinct.\u003c\/li\u003e\n\u003cli\u003eConfirm the current supplied inventory and the exact installation and final testing instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePackage Contents and Separate Requirements\u003c\/h2\u003e\u003cp\u003eThis offer identifies the flat-washer service item. Confirm current quantity and complete dimensional requirements. Nuts, bolts, locking washers, pins, bearings, shafts and complete assemblies are not established as included. The nominal 3\/4-inch description does not establish an assortment or a complete fastening kit.\u003c\/p\u003e\u003ch2 class=\"safety-warning\"\u003eSafety Warnings — Read Before Installation or Service\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWARNING: A moving commercial door and exposed flat washer — 3\/4-inch designation can cause serious injury or death. Have a trained door-systems technician perform installation and service.\u003c\/li\u003e\n\u003cli\u003eDisconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.\u003c\/li\u003e\n\u003cli\u003eDo not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.\u003c\/li\u003e\n\u003cli\u003eRestore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRelated Products and Important Differences\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-photocell-kit-indoor-only-for-30-wide-openings\"\u003eCPS-U monitored photo eyes\u003c\/a\u003e — separate protection devices for approved commercial-door controls; match the operator and environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-extended-duty-trolley-operator\"\u003eTDC12X1BMC MAXUM trolley operator\u003c\/a\u003e — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eAre all dimensions stated?\u003c\/h3\u003e\u003cp\u003eNo. The nominal size does not establish outside diameter, thickness or every fit requirement.\u003c\/p\u003e\u003ch3\u003eIs this a lock washer?\u003c\/h3\u003e\u003cp\u003eNo. The manufacturer description identifies a flat washer.\u003c\/p\u003e\u003ch3\u003eCan it be used as an improvised adjustment shim?\u003c\/h3\u003e\u003cp\u003eNo such adjustment is established. Restore the exact approved hardware arrangement.\u003c\/p\u003e\u003ch3\u003eHow many are supplied?\u003c\/h3\u003e\u003cp\u003eConfirm current package quantity independently of the number used in the equipment drawing.\u003c\/p\u003e\u003ch2\u003eNeed Help Confirming the Right Product?\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/garage-doorparts.com\/pages\/contact\"\u003eContact Garage-DoorParts.com before ordering\u003c\/a\u003e. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.\u003c\/p\u003e","brand":"Controlled Products","offers":[{"title":"Default Title","offer_id":60730272776478,"sku":"K85-FW-75","price":1.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/2781\/5710\/files\/k85-fw-75.png?v=1793254880","url":"https:\/\/garage-doorparts.com\/products\/liftmaster-k85-fw-75","provider":"garage-doorparts.com","version":"1.0","type":"link"}