{"product_id":"liftmaster-k17-2001","title":"LiftMaster K17-2001 Barrier Operator Pulley — 8-Inch Diameter, 5\/8-Inch Bore, 4L Belt","description":"\u003cp\u003e\u003cstrong\u003eThe LiftMaster K17-2001 is the pulley identified with an 8-inch diameter, 5\/8-inch bore and 4L belt profile for the documented BG770 and BG790 barrier-operator drive arrangement. Select it by the complete service reference and actual pulley configuration. The 4L designation describes the belt profile, not its length, and matching the shaft bore alone does not establish a complete drive match. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility — Models, Versions and Exclusions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel or selection point\u003c\/th\u003e\n\u003cth\u003eCompatibility requirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBG770 \/ BG790\u003c\/td\u003e\n\u003ctd\u003eVerify the pulley callout in the applicable drive drawing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelt selection\u003c\/td\u003e\n\u003ctd\u003eConfirm the separately specified belt length and profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft attachment\u003c\/td\u003e\n\u003ctd\u003eCheck bore, hub and retention arrangement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther pulleys\u003c\/td\u003e\n\u003ctd\u003eDo not change ratio or use another diameter without an approved specification.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIdentify the Assembly and Plan the Repair\u003c\/h2\u003e\u003cp\u003eThe pulley must align with its mating pulley and fit within the documented drive adjustment and guarding arrangement. Inspect the belt grooves, shaft attachment and supports before selecting a replacement. Belt slip or noise can come from wear or misalignment elsewhere rather than the pulley alone.\u003c\/p\u003e\u003cp\u003eBarrier equipment can retain balancing loads even after electrical power is isolated. Have qualified personnel secure the arm and drive before removing transmission parts. Obtain any unstated hub or keying dimensions from the exact service information and restore the approved belt adjustment rather than increasing tension to conceal mechanical resistance.\u003c\/p\u003e\u003cp\u003eCompare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.\u003c\/p\u003e\u003ch2\u003eSpecifications and Product Identification\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrdering reference\u003c\/td\u003e\n\u003ctd\u003eK17-2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulley diameter\u003c\/td\u003e\n\u003ctd\u003e8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore\u003c\/td\u003e\n\u003ctd\u003e5\/8 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelt profile\u003c\/td\u003e\n\u003ctd\u003e4L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDocumented platforms\u003c\/td\u003e\n\u003ctd\u003eBG770 \/ BG790; exact configuration must match\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRecord the full barrier operator and drive arrangement.\u003c\/li\u003e\n\u003cli\u003eVerify 8-inch diameter, 5\/8-inch bore and 4L profile.\u003c\/li\u003e\n\u003cli\u003eCheck belt length, alignment and retention separately.\u003c\/li\u003e\n\u003cli\u003eInspect the cause of pulley or belt wear before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePackage Contents and Separate Requirements\u003c\/h2\u003e\u003cp\u003eThis offer identifies the pulley service component. A belt, shaft key, retention hardware, motor, reducer and complete barrier operator are not established as included. Confirm the current pulley package and obtain other worn drive parts separately where the service inspection requires them.\u003c\/p\u003e\u003ch2 class=\"safety-warning\"\u003eSafety Warnings — Read Before Installation or Service\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWARNING: A moving gate and exposed barrier operator pulley — 8-inch diameter, 5\/8-inch bore, 4l belt can cause serious injury. Installation and service require a qualified gate-systems technician.\u003c\/li\u003e\n\u003cli\u003eIsolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.\u003c\/li\u003e\n\u003cli\u003eSecure the barrier arm and stored balancing loads before drive service. Restore the specified pulley alignment, belt adjustment and guarding rather than increase force or tension to conceal binding.\u003c\/li\u003e\n\u003cli\u003eRestore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRelated Products and Important Differences\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-lmrrul-monitored-retro-reflective-photo-eye\"\u003eLMRRUL monitored photo eye\u003c\/a\u003e — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-lmwekitu-monitored-wireless-edge-kit-for-gate-operators\"\u003eLMWEKITU monitored wireless edge kit\u003c\/a\u003e — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes 4L mean a four-inch belt?\u003c\/h3\u003e\u003cp\u003eNo. It is the belt profile; length is a separate selection from the actual drive specification.\u003c\/p\u003e\u003ch3\u003eWill a matching bore prove fit?\u003c\/h3\u003e\u003cp\u003eNo. Diameter, hub geometry, retention, belt profile and alignment must also match.\u003c\/p\u003e\u003ch3\u003eIs a belt included?\u003c\/h3\u003e\u003cp\u003eNo belt is established as included. Confirm the current pulley package before ordering separate drive parts.\u003c\/p\u003e\u003ch3\u003eCan another diameter improve operator capacity?\u003c\/h3\u003e\u003cp\u003eNo capacity conversion is established. Use the approved pulley and complete drive ratio for the installed operator.\u003c\/p\u003e\u003ch2\u003eNeed Help Confirming the Right Product?\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/garage-doorparts.com\/pages\/contact\"\u003eContact Garage-DoorParts.com before ordering\u003c\/a\u003e. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.\u003c\/p\u003e","brand":"Controlled Products","offers":[{"title":"Default Title","offer_id":60730226966814,"sku":"K17-2001","price":54.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/2781\/5710\/files\/k17-2001.jpg?v=1793254768","url":"https:\/\/garage-doorparts.com\/products\/liftmaster-k17-2001","provider":"garage-doorparts.com","version":"1.0","type":"link"}