{"product_id":"liftmaster-k15-5032","title":"LiftMaster K15-5032 BG790 #50 Sprocket — 32 Teeth, 1-1\/2-Inch Bore","description":"\u003cp\u003e\u003cstrong\u003eThe LiftMaster K15-5032 is the sprocket identified with a 50B32T designation and 1-1\/2-inch by 1\/2-inch shaft\/keying description for the documented BG790 barrier-operator arrangement. Match the exact shaft and drive drawing before ordering. The #50 chain series, 32-tooth count, bore and keying must all suit the approved configuration rather than merely resemble another barrier sprocket. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility — Models, Versions and Exclusions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel or selection point\u003c\/th\u003e\n\u003cth\u003eCompatibility requirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBG790 service drawing\u003c\/td\u003e\n\u003ctd\u003eMatch K15-5032 at the correct shaft location.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain series\u003c\/td\u003e\n\u003ctd\u003eConfirm #50 chain and approved 32-tooth ratio.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft and key\u003c\/td\u003e\n\u003ctd\u003eVerify bore, keying and required retention geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther barrier drives\u003c\/td\u003e\n\u003ctd\u003eNo universal sprocket interchangeability is established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIdentify the Assembly and Plan the Repair\u003c\/h2\u003e\u003cp\u003eInspect the mating chain, shaft and keyway before selecting a sprocket-only repair. A stretched chain, damaged shaft surface or poor alignment can affect a correct replacement. Identify the actual main and intermediate drive arrangement in the BG790 drawing rather than select from tooth count alone.\u003c\/p\u003e\u003cp\u003eConfirm current supplied retention pieces and the complete hub and clearance requirements before dismantling the drive. Do not change tooth count to improvise a different speed or barrier capacity. Have qualified personnel secure the arm and stored balancing loads, restore the approved chain path and guarding and complete the required operator and protection checks after service.\u003c\/p\u003e\u003cp\u003eCompare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.\u003c\/p\u003e\u003ch2\u003eSpecifications and Product Identification\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrdering reference\u003c\/td\u003e\n\u003ctd\u003eK15-5032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eRoller-chain sprocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain \/ tooth designation\u003c\/td\u003e\n\u003ctd\u003e50B32T: #50 chain, 32 teeth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore designation\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeying designation\u003c\/td\u003e\n\u003ctd\u003e1\/2 inch; verify exact shaft arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDocumented application\u003c\/td\u003e\n\u003ctd\u003eBG790 barrier operator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRecord the complete equipment model, serial information and installed service reference.\u003c\/li\u003e\n\u003cli\u003eMatch K15-5032 at the correct shaft location.\u003c\/li\u003e\n\u003cli\u003eConfirm #50 chain and approved 32-tooth ratio.\u003c\/li\u003e\n\u003cli\u003eVerify bore, keying and required retention geometry.\u003c\/li\u003e\n\u003cli\u003eConfirm the current supplied inventory and exact installation and final testing instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePackage Contents and Separate Requirements\u003c\/h2\u003e\u003cp\u003eThis offer identifies the sprocket service component. A chain, shaft key, retaining hardware, intermediate or main shaft, complete drive assembly and operator are not established as included. Confirm the current sprocket inventory and obtain separately worn parts from the exact BG790 service arrangement.\u003c\/p\u003e\u003ch2 class=\"safety-warning\"\u003eSafety Warnings — Read Before Installation or Service\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWARNING: A moving gate and exposed bg790 #50 sprocket — 32 teeth, 1-1\/2-inch bore can cause serious injury. Installation and service require a qualified gate-systems technician.\u003c\/li\u003e\n\u003cli\u003eIsolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.\u003c\/li\u003e\n\u003cli\u003eKeep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.\u003c\/li\u003e\n\u003cli\u003eRestore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRelated Products and Important Differences\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-lmrrul-monitored-retro-reflective-photo-eye\"\u003eLMRRUL monitored photo eye\u003c\/a\u003e — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-lmwekitu-monitored-wireless-edge-kit-for-gate-operators\"\u003eLMWEKITU monitored wireless edge kit\u003c\/a\u003e — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes 50 mean 50 teeth?\u003c\/h3\u003e\u003cp\u003eNo. It identifies the chain series; 32T identifies the tooth count.\u003c\/p\u003e\u003ch3\u003eDoes a matching bore prove fit?\u003c\/h3\u003e\u003cp\u003eNo. Chain series, tooth count, keying, hub position and retention must also match.\u003c\/p\u003e\u003ch3\u003eIs a shaft key included?\u003c\/h3\u003e\u003cp\u003eNo key is established as included. Confirm the current package and required key separately.\u003c\/p\u003e\u003ch3\u003eCan another tooth count increase capacity?\u003c\/h3\u003e\u003cp\u003eNo conversion is established. Restore the approved complete drive ratio and barrier arrangement.\u003c\/p\u003e\u003ch2\u003eNeed Help Confirming the Right Product?\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/garage-doorparts.com\/pages\/contact\"\u003eContact Garage-DoorParts.com before ordering\u003c\/a\u003e. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.\u003c\/p\u003e","brand":"Controlled Products","offers":[{"title":"Default Title","offer_id":60730297450782,"sku":"K15-5032","price":53.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/2781\/5710\/files\/k15-5032.jpg?v=1793254923","url":"https:\/\/garage-doorparts.com\/products\/liftmaster-k15-5032","provider":"garage-doorparts.com","version":"1.0","type":"link"}