{"product_id":"liftmaster-k15-19478","title":"LiftMaster K15-19478 48B32T Sprocket — 1-1\/2-Inch Bore","description":"\u003cp\u003e\u003cstrong\u003eThe LiftMaster K15-19478 identifies the 48B32T sprocket with a 1-1\/2-inch bore listed in the documented commercial drive arrangement. The designation specifies the #48 chain series and 32 teeth, while the bore identifies the nominal shaft fit. Match the complete operator service drawing, mounting and retention arrangement before choosing it as an output-drive replacement. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility — Models, Versions and Exclusions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel or selection point\u003c\/th\u003e\n\u003cth\u003eCompatibility requirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatching service drawing\u003c\/td\u003e\n\u003ctd\u003eUse where K15-19478 or the documented 15-19478 reference is specified.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain selection\u003c\/td\u003e\n\u003ctd\u003eMatch the #48 drive arrangement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft and mounting\u003c\/td\u003e\n\u003ctd\u003eVerify 1-1\/2-inch bore and complete retention geometry.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther tooth counts\u003c\/td\u003e\n\u003ctd\u003eDo not substitute a different ratio to change operator performance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIdentify the Assembly and Plan the Repair\u003c\/h2\u003e\u003cp\u003eSprocket fit depends on more than shaft diameter. The chain series, tooth count, mounting position and adjacent drive components must all match the approved arrangement. A different sprocket can alter drive behavior or fail to align with the chain even when it physically slides onto the shaft.\u003c\/p\u003e\u003cp\u003eInspect the chain, shaft, bearings and mating sprocket together. If a chain has worn unevenly or the drive is misaligned, replacing the sprocket alone can leave the original cause of wear in place. Obtain any missing hub or retention dimensions from the exact service drawing rather than guessing from the 48B32T designation.\u003c\/p\u003e\u003cp\u003eCompare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.\u003c\/p\u003e\u003ch2\u003eSpecifications and Product Identification\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrdering reference\u003c\/td\u003e\n\u003ctd\u003eK15-19478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSprocket designation\u003c\/td\u003e\n\u003ctd\u003e48B32T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain series\u003c\/td\u003e\n\u003ctd\u003e#48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth count\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther dimensions\u003c\/td\u003e\n\u003ctd\u003eConfirm hub, keying and retention from current service information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm the complete sprocket service reference.\u003c\/li\u003e\n\u003cli\u003eVerify #48 chain, 32 teeth and 1-1\/2-inch bore.\u003c\/li\u003e\n\u003cli\u003eCheck hub position, shaft retention and clearances.\u003c\/li\u003e\n\u003cli\u003eInspect the adjoining chain drive for wear and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePackage Contents and Separate Requirements\u003c\/h2\u003e\u003cp\u003eThis offer identifies the sprocket service component. Confirm current supplied retention hardware. A drive chain, shaft key, shaft, bearings, mating sprocket and complete output assembly are not established as included; the equipment-specific parts drawing determines the separate service requirements.\u003c\/p\u003e\u003ch2 class=\"safety-warning\"\u003eSafety Warnings — Read Before Installation or Service\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWARNING: A moving commercial door and exposed 48b32t sprocket — 1-1\/2-inch bore can cause serious injury or death. Have a trained door-systems technician perform installation and service.\u003c\/li\u003e\n\u003cli\u003eDisconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.\u003c\/li\u003e\n\u003cli\u003eDo not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.\u003c\/li\u003e\n\u003cli\u003eRestore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRelated Products and Important Differences\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-photocell-kit-indoor-only-for-30-wide-openings\"\u003eCPS-U monitored photo eyes\u003c\/a\u003e — separate protection devices for approved commercial-door controls; match the operator and environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/garage-doorparts.com\/products\/liftmaster-extended-duty-trolley-operator\"\u003eTDC12X1BMC MAXUM trolley operator\u003c\/a\u003e — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes 48B32T mean 48 teeth?\u003c\/h3\u003e\u003cp\u003eNo. The identified sprocket is for the #48 chain series and has 32 teeth.\u003c\/p\u003e\u003ch3\u003eWill a matching bore prove fit?\u003c\/h3\u003e\u003cp\u003eNo. Chain series, tooth count, hub position, retention and the approved service application must also match.\u003c\/p\u003e\u003ch3\u003eIs a new chain included?\u003c\/h3\u003e\u003cp\u003eNo chain is established as included. Inspect and order the correct chain separately when required.\u003c\/p\u003e\u003ch3\u003eCan I use another tooth count for more capacity?\u003c\/h3\u003e\u003cp\u003eUse the manufacturer’s approved drive ratio. A sprocket change is not an authorized operator capacity upgrade.\u003c\/p\u003e\u003ch2\u003eNeed Help Confirming the Right Product?\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/garage-doorparts.com\/pages\/contact\"\u003eContact Garage-DoorParts.com before ordering\u003c\/a\u003e. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.\u003c\/p\u003e","brand":"Controlled Products","offers":[{"title":"Default Title","offer_id":60730200326430,"sku":"K15-19478","price":37.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/2781\/5710\/files\/k15-19478.jpg?v=1793254703","url":"https:\/\/garage-doorparts.com\/products\/liftmaster-k15-19478","provider":"garage-doorparts.com","version":"1.0","type":"link"}